2014 Land Rover LR4 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 Land Rover LR4, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 72.6 mm |
| Offset (ET) | 53 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2014 LR4 — Year-Specific Fitment Context
The 2014 Land Rover LR4 is in year 5 of 7 using the 5x120 pattern (2010–2016). Wheels from any 2010–2016 Land Rover LR4 are cross-compatible with the 2014 model.
Land Rover LR4 Bolt Pattern by Year
The table below shows how the LR4's wheel specifications have changed over the years. The 2014 model year is highlighted.
5x120 Pattern Context
This bolt pattern appears on 633 vehicles in our current database and is considered common.
Examples of other vehicles using 5x120:
Expert Buying Guide for 2014 Land Rover LR4
The 2014 Land Rover LR4 uses a 5x120 bolt pattern with a 72.6mm center bore. When installing aftermarket wheels, hub-centric rings are mandatory to ensure proper load distribution and prevent vibrations. The factory offset is 53mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use the correct lug nuts: 14x1.5 thread pitch with a ball seat (OEM) or cone seat for aftermarket wheels. Mixing seat types can lead to wheel loosening. Re-torque after 50-100 miles and verify hub bore fitment to avoid safety hazards.
Historical Fitment Data Reference
In our dataset, Land Rover LR4 appears from 2010 to 2016 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings (72.6mm to aftermarket bore) to prevent vibrations and ensure proper centering.
- ✅ Stick to offset within 48-58mm to avoid rubbing on suspension or body components.
- ✅ Re-torque lug nuts to 103 lb-ft after 50-100 miles; use a torque wrench and verify ball seat compatibility.
- ⚠️ Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2014 Land Rover LR4 — Frequently Asked Questions
What is the bolt pattern for a 2014 Land Rover LR4?
The 2014 Land Rover LR4 uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 72.6mm and the offset is 53mm.
What other years of Land Rover LR4 have the same bolt pattern as the 2014?
The Land Rover LR4 uses the 5x120 pattern from 2010 through 2016. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
What is the center bore of a 2014 Land Rover LR4?
The factory center bore (hub bore) for the 2014 Land Rover LR4 is 72.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What lug nut size does the 2014 Land Rover LR4 use?
The 2014 Land Rover LR4 uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 2014 Land Rover LR4?
The OEM offset for the 2014 LR4 is typically around 53mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2014 Land Rover LR4?
Yes, but ensure the wheel spacers match the 5x120 bolt pattern and 72.6mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset