2010 Lexus GX Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2010 Lexus GX is 6x139.7 (6x5.5"). It has a center bore of 106.1 mm, an offset range of 25, and utilizes N 12x1.50 (Flat/Mag seat, 21mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2010 Lexus GX Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Center Bore (Hub Bore) | 106.1 mm |
| Offset Range (ET) | 25 |
| Thread Size (Lug Nut / Bolt) | N 12x1.50 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2010 GX β Year-Specific Fitment Context
The 2010 Lexus GX is in year 8 of 23 using the 6x139.7 pattern (2003β2025). Wheels from any 2003β2025 Lexus GX are cross-compatible with the 2010 model. Across its full production run (2003β2025), the GX has also used: 5x114.3, 5x150.
Lexus GX Bolt Pattern by Year
The table below shows how the GX's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2003 | 6x139.7 | 106.1 | 25 |
| 2004 | 6x139.7 | 106.1 | 25 |
| 2005 | 6x139.7 | 106.1 | 25 |
| 2006 | 5x150 | 110.1 | 25 |
| 2007 | 5x114.3 | 60.1 | 25 |
| 2008 | 6x139.7 | 106.1 | 25 |
| 2009 | 6x139.7 | 106.1 | 25 |
| βΈ 2010 | 6x139.7 | 106.1 | 25 |
| 2011 | 6x139.7 | 106.1 | 25 |
| 2012 | 6x139.7 | 106.1 | 25 |
| 2013 | 6x139.7 | 106.1 | 25 |
| 2014 | 6x139.7 | 106.1 | 25 |
| 2015 | 6x139.7 | 106.1 | 25 |
| 2016 | 6x139.7 | 106.1 | 25 |
| 2017 | 6x139.7 | 106.1 | 25 |
| 2018 | 6x139.7 | 106.1 | 25 |
| 2019 | 6x139.7 | 106.1 | 25 |
| 2020 | 6x139.7 | 106.1 | 25 |
| 2021 | 6x139.7 | 106.1 | 25 |
| 2022 | 6x139.7 | 106.1 | 25 |
| 2023 | 6x139.7 | 106.1 | 25 |
| 2024 | 6x139.7 | 95.1 | 25 |
| 2025 | 6x139.7 | 95.1 | 45-60 |
2010 Lexus GX Wheel Interchange & Donor Fitment Guide (6x139.7)
The 6x139.7 bolt pattern is shared by 1069 vehicles in our database (common). For safe wheel swaps on the 2010 Lexus GX, donor rims must match the 6x139.7 PCD and have a center bore of at least 106.1 mm:
HUB RING FITMENT Same 6x139.7 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD β ID) | OEM Offset (ET) |
|---|---|---|---|
| 1992 Dodge Ram 50 Regular Cab | 108.0 mm | 108.0mm β 106.1mm |
10-25mm |
| 2024 Isuzu NPR | 110 mm | 110mm β 106.1mm |
Not Applicable |
| 2024 Isuzu NPR-HD | 110 mm | 110mm β 106.1mm |
Not Applicable |
| 1992 Isuzu Trooper | 108.0 mm | 108.0mm β 106.1mm |
8 |
Expert Buying Guide for 2010 Lexus GX
For your 2010 Lexus GX, the 6x139.7 bolt pattern is shared with all 2003β2024 GX models, ensuring cross-compatibility. However, the 106.1mm center bore is critical: aftermarket wheels with larger bores require hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 25mm; deviations beyond Β±10mm may cause rubbing or suspension interference. Always use lug nuts with the correct thread pitch (12x1.50) and seat typeβfactory wheels use conical (60-degree) seats, while aftermarket may require ball or conical seats. Never mix seat types. Re-torque after 50-100 miles to maintain clamping force.
Historical Fitment Data Reference
In our dataset, Lexus GX appears from 2003 to 2025 (23 model years). Across model years, this model appears with 3 bolt patterns (5x114.3, 5x150, 6x139.7).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 4
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 105.0 mm
Quick Tips & Safety Warnings
- β Re-torque lug nuts to 97 ft-lb after 50-100 miles of driving to prevent loosening.
- β If installing aftermarket wheels, verify hub bore and use hub-centric rings if bore >106.1mm.
- β Avoid spacers unless necessary; if used, ensure extended studs and proper offset to maintain scrub radius.
- β οΈ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- β οΈ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- β οΈ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
2010 Lexus GX β Frequently Asked Questions
What is the bolt pattern for a 2010 Lexus GX?
The 2010 Lexus GX uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 106.1mm and the offset is 25mm.
What other years of Lexus GX have the same bolt pattern as the 2010?
The Lexus GX uses the 6x139.7 pattern from 2003 through 2025. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
Do 2010 Lexus GXs use lug bolts or lug nuts?
The 2010 GX requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I use spacers on my 2010 Lexus GX?
Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 106.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Will wheels from another Lexus fit my 2010 GX?
Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 106.1mm.
What is the PCD for a 2010 Lexus GX?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2010 GX, the PCD is 6x139.7.
Need Full Fitment Data in Bulk?
Stop scraping or looking up cars one by one. Import 12,400+ verified vehicle specs (1992β2025) directly into your Shopify store, inventory system, or custom automotive software.
Explore Master Database (CSV) →