2026 Lexus RC Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Lexus RC is 5x114.3 (5x4.5"). It has a center bore of 60.1 mm, an offset range of 35-45, and utilizes 12x1.5 (Flat seat, 21mm hex) fasteners tightened to 76 ft-lbs (103 Nm).
2026 Lexus RC Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 60.1 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 76 ft-lbs (103 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2026 RC — Year-Specific Fitment Context
The 2026 model year is the final year of the Lexus RC's 5x114.3 bolt pattern run (since 2015). Wheels from any 2015–2026 Lexus RC are cross-compatible with the 2026 model.
Lexus RC Bolt Pattern by Year
Looking for all generations? View the complete Lexus RC (2015–2026) Bolt Pattern & Generation Guide →
The table below shows how the RC's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Lexus RC Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 Lexus RC, donor rims must match the 5x114.3 PCD and have a center bore of at least 60.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 60.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2024 Ram 1000 | 60.1 mm (Exact) | 40 | 12x1.5 (Flat) |
| 2008 Saturn VUE | 60.1 mm (Exact) | 40 | 12x1.5 (Cone) |
| 2016 Scion iM | 60.1 mm (Exact) | 35-45mm | M12x1.5 (Cone) |
| 2011 Scion tC | 60.1 mm (Exact) | 39 | 12x1.5 (Cone) |
| 2008 Scion xB | 60.1 mm (Exact) | 45 | 12x1.5 (Cone) |
| 2025 Subaru Solterra | 60.1 mm (Exact) | 40 | 12x1.5 (Flat) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2025 Lotus Eletre | 64.1 mm | 64.1mm → 60.1mm |
Not Applicable |
| 2025 Lotus Emira | 67.1 mm | 67.1mm → 60.1mm |
35-45 |
| 2018 Lotus Evora 400 | 68.1 mm | 68.1mm → 60.1mm |
52 front, 69 rear |
| 2021 Lotus Evora GT | 68.0 mm | 68.0mm → 60.1mm |
50-60mm |
| 2024 Maserati Ghibli | 67.1 mm | 67.1mm → 60.1mm |
45 |
| 2025 Maserati Grancabrio | 67.1 mm | 67.1mm → 60.1mm |
35-45 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 76 ft-lbs (103 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Lexus RC — Frequently Asked Questions
What is the bolt pattern for a 2026 Lexus RC?
The 2026 Lexus RC uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35-45mm.
What other years of Lexus RC have the same bolt pattern as the 2026?
The Lexus RC uses the 5x114.3 pattern from 2015 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
What is the center bore of a 2026 Lexus RC?
The factory center bore (hub bore) for the 2026 Lexus RC is 60.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 2026 Lexus RC?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What lug nut size does the 2026 Lexus RC use?
The 2026 Lexus RC uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I put aftermarket wheels on my 2026 Lexus RC?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-45mm, and a center bore of at least 60.1mm (using hub rings if larger).
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →