2026 Lexus TX Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Lexus TX is 5x120. It has a center bore of 60.1 mm, an offset range of 30-40mm, and utilizes M14x1.5 (Flat/Mag seat, 21mm hex) fasteners tightened to 76 ft-lbs (103 Nm).
2026 Lexus TX Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Center Bore (Hub Bore) | 60.1 mm |
| Offset Range (ET) | 30-40mm |
| Thread Size (Lug Nut / Bolt) | M14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 76 ft-lbs (103 Nm) |
2026 TX — Year-Specific Fitment Context
The 2026 model year is the final year of the Lexus TX's 5x120 bolt pattern run (since 2023). Wheels from any 2023–2026 Lexus TX are cross-compatible with the 2026 model.
Lexus TX Bolt Pattern by Year
Looking for all generations? View the complete Lexus TX (2023–2026) Bolt Pattern & Generation Guide →
The table below shows how the TX's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Lexus TX Wheel Interchange & Donor Fitment Guide (5x120)
The 5x120 bolt pattern is shared by 641 vehicles in our database (common). For safe wheel swaps on the 2026 Lexus TX, donor rims must match the 5x120 PCD and have a center bore of at least 60.1 mm:
DIRECT HUB MATCH Same 5x120 Pattern & Exact 60.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Lexus LC | 60.1 mm (Exact) | 20-30mm | M14x1.5 (Flat/Mag) |
| 2006 Lexus LS | 60.1 mm (Exact) | 35 | N 14x1.50 (Flat/Mag) |
HUB RING FITMENT Same 5x120 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2020 Land Rover Defender 110 | 72.6 mm | 72.6mm → 60.1mm |
41 |
| 2025 Land Rover Defender 130 | 72.6 mm | 72.6mm → 60.1mm |
41 |
| 2020 Land Rover Defender 90 | 72.6 mm | 72.6mm → 60.1mm |
41 |
| 2003 Land Rover Discovery | 70.1 mm | 70.1mm → 60.1mm |
57 |
| 2016 Land Rover LR4 | 72.6 mm | 72.6mm → 60.1mm |
53 |
| 2002 Land Rover Range Rover | 72.6 mm | 72.6mm → 60.1mm |
52 |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 76 ft-lbs (103 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Lexus TX — Frequently Asked Questions
What is the bolt pattern for a 2026 Lexus TX?
The 2026 Lexus TX uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 30-40mmmm.
What other years of Lexus TX have the same bolt pattern as the 2026?
The Lexus TX uses the 5x120 pattern from 2023 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
Can I use spacers on my 2026 Lexus TX?
Yes, but ensure the wheel spacers match the 5x120 bolt pattern and 60.1mm center bore. Also verify that you have enough thread engagement for your M14x1.5 hardware.
What lug nut size does the 2026 Lexus TX use?
The 2026 Lexus TX uses M14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Do 2026 Lexus TXs use lug bolts or lug nuts?
The 2026 TX requires M14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I put aftermarket wheels on my 2026 Lexus TX?
Absolutely. Just ensure the aftermarket wheels have a 5x120 bolt pattern, an offset near 30-40mmmm, and a center bore of at least 60.1mm (using hub rings if larger).
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →