2000 Lincoln Navigator Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Lincoln Navigator, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x135 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.75 |
| Center Bore (CB) | 70.1 mm |
| Offset (ET) | 15 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2000 Navigator — Year-Specific Fitment Context
The 2000 Lincoln Navigator is in year 3 of 6 using the 5x135 pattern (1998–2003). Wheels from any 1998–2003 Lincoln Navigator are cross-compatible with the 2000 model. Across its full production run (1998–2024), the Navigator has also used: 6x135.
Lincoln Navigator Bolt Pattern by Year
The table below shows how the Navigator's wheel specifications have changed over the years. The 2000 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1998 | 5x135 | 70.1 | 15 |
| 1999 | 5x135 | 70.1 | 15 |
| ▸ 2000 | 5x135 | 70.1 | 15 |
| 2001 | 5x135 | 70.1 | 15 |
| 2002 | 5x135 | 70.1 | 15 |
| 2003 | 5x135 | 70.1 | 15 |
| 2004 | 6x135 | 87.1 | 45 |
| 2005 | 6x135 | 87.1 | 45 |
| 2006 | 6x135 | 87.1 | 45 |
| 2007 | 6x135 | 87.1 | 45 |
| 2008 | 6x135 | 87.1 | 45 |
| 2009 | 6x135 | 87.1 | 45 |
| 2010 | 6x135 | 87.1 | 45 |
| 2011 | 6x135 | 87.1 | 45 |
| 2012 | 6x135 | 87.1 | 45 |
| 2013 | 6x135 | 87.1 | 45 |
| 2014 | 6x135 | 87.1 | 45 |
| 2015 | 6x135 | 87.1 | 45 |
| 2016 | 6x135 | 87.1 | 45 |
| 2017 | 6x135 | 87.1 | 45 |
| 2018 | 6x135 | 87.1 | 44 |
| 2019 | 6x135 | 87.1 | 44 |
| 2020 | 6x135 | 87.1 | 44 |
| 2021 | 6x135 | 87.1 | 44 |
| 2022 | 6x135 | 87.1 | 44 |
| 2023 | 6x135 | 87.1 | 44 |
| 2024 | 6x135 | 87.1 | 44 |
5x135 Pattern Context
This bolt pattern appears on 31 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x135:
Expert Buying Guide for 2000 Lincoln Navigator
For your 2000 Lincoln Navigator, the 5x135 bolt pattern is shared with 1998-2003 models. The 70.1mm center bore requires hub-centric rings when installing aftermarket wheels to prevent vibration and ensure proper load distribution. Offset is critical: stock is 15mm, and deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.75) and seat type (cone seat). Ball-seat or incorrect pitch nuts can loosen, leading to wheel detachment. Verify that aftermarket wheels have sufficient caliper clearance and load rating for this heavy SUV.
Historical Fitment Data Reference
In our dataset, Lincoln Navigator appears from 1998 to 2024 (27 model years). Across model years, this model appears with 2 bolt patterns (5x135, 6x135).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 30.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain proper clamping force.
- ✅ Avoid using universal fit wheels without hub-centric rings; the 70.1mm bore is specific and mismatch causes vibrations.
- ✅ Check for caliper clearance when changing offset; even 5mm difference can cause rubbing on the 2000 Navigator.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 Lincoln Navigator — Frequently Asked Questions
What is the bolt pattern for a 2000 Lincoln Navigator?
The 2000 Lincoln Navigator uses a 5x135 bolt pattern (also called lug pattern or PCD). The center bore is 70.1mm and the offset is 15mm.
What other years of Lincoln Navigator have the same bolt pattern as the 2000?
The Lincoln Navigator uses the 5x135 pattern from 1998 through 2003. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
Can I use spacers on my 2000 Lincoln Navigator?
Yes, but ensure the wheel spacers match the 5x135 bolt pattern and 70.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.75 hardware.
Will wheels from another Lincoln fit my 2000 Navigator?
Only if they share the exact same 5x135 bolt pattern, a compatible offset, and a center bore equal to or larger than 70.1mm.
What is the factory wheel offset for a 2000 Lincoln Navigator?
The OEM offset for the 2000 Navigator is typically around 15mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I put aftermarket wheels on my 2000 Lincoln Navigator?
Absolutely. Just ensure the aftermarket wheels have a 5x135 bolt pattern, an offset near 15mm, and a center bore of at least 70.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset