2026 Lucid Air Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Lucid Air is 5x120. It has a center bore of 64.1 mm, an offset range of 35-45, and utilizes 14x1.5 (Ball seat, 21mm hex) fasteners tightened to 103 ft-lbs (140 Nm).
2026 Lucid Air Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Center Bore (Hub Bore) | 64.1 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 103 ft-lbs (140 Nm) |
2026 Air — Year-Specific Fitment Context
The 2026 model year is the final year of the Lucid Air's 5x120 bolt pattern run (since 2022). Wheels from any 2022–2026 Lucid Air are cross-compatible with the 2026 model.
Lucid Air Bolt Pattern by Year
Looking for all generations? View the complete Lucid Air (2022–2026) Bolt Pattern & Generation Guide →
The table below shows how the Air's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Lucid Air Wheel Interchange & Donor Fitment Guide (5x120)
The 5x120 bolt pattern is shared by 641 vehicles in our database (common). For safe wheel swaps on the 2026 Lucid Air, donor rims must match the 5x120 PCD and have a center bore of at least 64.1 mm:
DIRECT HUB MATCH Same 5x120 Pattern & Exact 64.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2018 Honda Odyssey | 64.1 mm (Exact) | 55 | 14x1.5 (Ball) |
| 2019 Honda Passport | 64.1 mm (Exact) | 55 | 14x1.5 (Ball) |
| 2009 Honda Pilot | 64.1 mm (Exact) | 45 | 14x1.5 (Ball) |
| 2024 Honda Ridgeline | 64.1 mm (Exact) | 55 | 14x1.5 (Ball) |
| 2025 Tesla Model S | 64.1 mm (Exact) | 35-40 | 14x1.5 (Cone) |
| 2025 Tesla Model X | 64.1 mm (Exact) | 35-45 | 14x1.5 (Cone) |
HUB RING FITMENT Same 5x120 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2019 Cadillac XTS | 66.9 mm | 66.9mm → 64.1mm |
35-45mm |
| 2010 Chevrolet Camaro | 67.1 mm | 67.1mm → 64.1mm |
36 |
| 2020 Chevrolet Corvette | 66.9 mm | 66.9mm → 64.1mm |
50 |
| 2011 Chevrolet Equinox | 66.6 mm | 66.6mm → 64.1mm |
42 |
| 2012 Chevrolet Impala | 66.9 mm | 66.9mm → 64.1mm |
42 |
| 2011 Chevrolet Malibu | 67.1 mm | 67.1mm → 64.1mm |
40 |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 103 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Lucid Air — Frequently Asked Questions
What is the bolt pattern for a 2026 Lucid Air?
The 2026 Lucid Air uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 35-45mm.
What other years of Lucid Air have the same bolt pattern as the 2026?
The Lucid Air uses the 5x120 pattern from 2022 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2026 Lucid Air?
Absolutely. Just ensure the aftermarket wheels have a 5x120 bolt pattern, an offset near 35-45mm, and a center bore of at least 64.1mm (using hub rings if larger).
Do 2026 Lucid Airs use lug bolts or lug nuts?
The 2026 Air requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the factory wheel offset for a 2026 Lucid Air?
The OEM offset for the 2026 Air is typically around 35-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2026 Lucid Air?
Yes, but ensure the wheel spacers match the 5x120 bolt pattern and 64.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →