2010 Chevrolet Camaro Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Chevrolet Camaro, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 36 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2010 Camaro — Year-Specific Fitment Context
The 2010 model year marks the beginning of the Chevrolet Camaro's 5x120 bolt pattern era, which continued through 2024 (15 consecutive years). Wheels from any 2010–2024 Chevrolet Camaro are cross-compatible with the 2010 model. Across its full production run (1992–2024), the Camaro has also used: 5x120.65.
Chevrolet Camaro Bolt Pattern by Year
The table below shows how the Camaro's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x120.65 | 70.3 | 10 |
| 1993 | 5x120.65 | 70.3 | 10 |
| 1994 | 5x120.65 | 70.3 | 46 |
| 1995 | 5x120.65 | 70.3 | 46 |
| 1996 | 5x120.65 | 70.3 | 46 |
| 1997 | 5x120.65 | 70.3 | 46 |
| 1998 | 5x120.65 | 70.3 | 46 |
| 1999 | 5x120.65 | 70.3 | 46 |
| 2000 | 5x120.65 | 70.3 | 46 |
| 2001 | 5x120.65 | 70.3 | 46 |
| 2002 | 5x120.65 | 70.3 | 46 |
| ▸ 2010 | 5x120 | 67.1 | 36 |
| 2011 | 5x120 | 67.1 | 36 |
| 2012 | 5x120 | 67.1 | 36 |
| 2013 | 5x120 | 67.1 | 36 |
| 2014 | 5x120 | 67.1 | 36 |
| 2015 | 5x120 | 67.1 | 36 |
| 2016 | 5x120 | 67.1 | 36 |
| 2017 | 5x120 | 67.1 | 36 |
| 2018 | 5x120 | 67.1 | 36 |
| 2019 | 5x120 | 66.9 | 35 |
| 2020 | 5x120 | 66.9 | 35 |
| 2021 | 5x120 | 66.9 | 35 |
| 2022 | 5x120 | 66.9 | 35 |
| 2023 | 5x120 | 66.9 | 35 |
| 2024 | 5x120 | 66.9 | 35 |
5x120 Pattern Context
This bolt pattern appears on 633 vehicles in our current database and is considered common.
Examples of other vehicles using 5x120:
Expert Buying Guide for 2010 Chevrolet Camaro
For the 2010 Chevrolet Camaro, the 5x120 bolt pattern and 67.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The offset is sensitive; the factory range is around 36mm. Deviating too far can cause rubbing or poor handling. Always use the correct lug nuts: 14x1.50 thread pitch with a conical (60-degree) seat. Never use ball-seat or acorn nuts, as they can loosen or damage the wheel. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Chevrolet Camaro appears from 1992 to 2024 (26 model years). Across model years, this model appears with 2 bolt patterns (5x120, 5x120.65).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 36.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50-100 miles of driving.
- ✅ Avoid using wheels from 1992-2002 Camaros (5x120.65) without wobble bolts or re-drilling.
- ✅ Check inner clearance for aftermarket wheels; offset beyond 30-40mm may require spacers or fender rolling.
- ⚠️ Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Chevrolet Camaro — Frequently Asked Questions
What is the bolt pattern for a 2010 Chevrolet Camaro?
The 2010 Chevrolet Camaro uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 36mm.
What other years of Chevrolet Camaro have the same bolt pattern as the 2010?
The Chevrolet Camaro uses the 5x120 pattern from 2010 through 2024. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2010 Chevrolet Camaro?
Absolutely. Just ensure the aftermarket wheels have a 5x120 bolt pattern, an offset near 36mm, and a center bore of at least 67.1mm (using hub rings if larger).
How tight should I torque the lug nuts on a 2010 Chevrolet Camaro?
Refer to your owner's manual for exact specs, but always tighten the N 14x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Will wheels from another Chevrolet fit my 2010 Camaro?
Only if they share the exact same 5x120 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Can I use spacers on my 2010 Chevrolet Camaro?
Yes, but ensure the wheel spacers match the 5x120 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 14x1.50 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset