2017 Chevrolet Camaro Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2017 Chevrolet Camaro, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 36 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2017 Camaro — Year-Specific Fitment Context
The 2017 Chevrolet Camaro is in year 8 of 15 using the 5x120 pattern (2010–2024). Wheels from any 2010–2024 Chevrolet Camaro are cross-compatible with the 2017 model. Across its full production run (1992–2024), the Camaro has also used: 5x120.65.
Chevrolet Camaro Bolt Pattern by Year
The table below shows how the Camaro's wheel specifications have changed over the years. The 2017 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x120.65 | 70.3 | 10 |
| 1993 | 5x120.65 | 70.3 | 10 |
| 1994 | 5x120.65 | 70.3 | 46 |
| 1995 | 5x120.65 | 70.3 | 46 |
| 1996 | 5x120.65 | 70.3 | 46 |
| 1997 | 5x120.65 | 70.3 | 46 |
| 1998 | 5x120.65 | 70.3 | 46 |
| 1999 | 5x120.65 | 70.3 | 46 |
| 2000 | 5x120.65 | 70.3 | 46 |
| 2001 | 5x120.65 | 70.3 | 46 |
| 2002 | 5x120.65 | 70.3 | 46 |
| 2010 | 5x120 | 67.1 | 36 |
| 2011 | 5x120 | 67.1 | 36 |
| 2012 | 5x120 | 67.1 | 36 |
| 2013 | 5x120 | 67.1 | 36 |
| 2014 | 5x120 | 67.1 | 36 |
| 2015 | 5x120 | 67.1 | 36 |
| 2016 | 5x120 | 67.1 | 36 |
| ▸ 2017 | 5x120 | 67.1 | 36 |
| 2018 | 5x120 | 67.1 | 36 |
| 2019 | 5x120 | 66.9 | 35 |
| 2020 | 5x120 | 66.9 | 35 |
| 2021 | 5x120 | 66.9 | 35 |
| 2022 | 5x120 | 66.9 | 35 |
| 2023 | 5x120 | 66.9 | 35 |
| 2024 | 5x120 | 66.9 | 35 |
5x120 Pattern Context
This bolt pattern appears on 633 vehicles in our current database and is considered common.
Examples of other vehicles using 5x120:
Expert Buying Guide for 2017 Chevrolet Camaro
For your 2017 Chevrolet Camaro, the bolt pattern is 5x120 with a 67.1mm center bore. When selecting aftermarket wheels, ensure the center bore matches exactly or use hub-centric rings to prevent vibrations. The offset is critical: stock is around 36mm, but you can vary by ±5mm without issues; going too far can cause rubbing or clearance problems. Always use the correct lug nuts: 14x1.50 thread pitch with a conical (60-degree) seat. Never use ball-seat lug nuts, as they can loosen. Re-torque after 50-100 miles. Wheels from 2010-2024 Camaros are direct fit, but avoid 5x120.65 pattern from older models.
Historical Fitment Data Reference
In our dataset, Chevrolet Camaro appears from 1992 to 2024 (26 model years). Across model years, this model appears with 2 bolt patterns (5x120, 5x120.65).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 36.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lb after 50-100 miles of driving.
- ✅ If using aftermarket wheels with a larger center bore, install hub-centric rings to match 67.1mm.
- ✅ Verify offset: stock is 36mm; offsets between 30-42mm typically fit without modification.
- ⚠️ Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2017 Chevrolet Camaro — Frequently Asked Questions
What is the bolt pattern for a 2017 Chevrolet Camaro?
The 2017 Chevrolet Camaro uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 36mm.
What other years of Chevrolet Camaro have the same bolt pattern as the 2017?
The Chevrolet Camaro uses the 5x120 pattern from 2010 through 2024. Wheels from any of these model years are dimensionally compatible with the 2017, provided the offset and center bore also match.
What is the factory wheel offset for a 2017 Chevrolet Camaro?
The OEM offset for the 2017 Camaro is typically around 36mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Will wheels from another Chevrolet fit my 2017 Camaro?
Only if they share the exact same 5x120 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
What is the PCD for a 2017 Chevrolet Camaro?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2017 Camaro, the PCD is 5x120.
Do 2017 Chevrolet Camaros use lug bolts or lug nuts?
The 2017 Camaro requires N 14x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset