1994 Chevrolet Camaro Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1994 Chevrolet Camaro, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120.65 (5x4.75") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x120.65 is commonly referred to as 5x4.75" in US Standard.
1994 Camaro — Year-Specific Fitment Context
The 1994 Chevrolet Camaro is in year 3 of 11 using the 5x120.65 pattern (1992–2002). Wheels from any 1992–2002 Chevrolet Camaro are cross-compatible with the 1994 model. Across its full production run (1992–2024), the Camaro has also used: 5x120.
Chevrolet Camaro Bolt Pattern by Year
The table below shows how the Camaro's wheel specifications have changed over the years. The 1994 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x120.65 | 70.3 | 10 |
| 1993 | 5x120.65 | 70.3 | 10 |
| ▸ 1994 | 5x120.65 | 70.3 | 46 |
| 1995 | 5x120.65 | 70.3 | 46 |
| 1996 | 5x120.65 | 70.3 | 46 |
| 1997 | 5x120.65 | 70.3 | 46 |
| 1998 | 5x120.65 | 70.3 | 46 |
| 1999 | 5x120.65 | 70.3 | 46 |
| 2000 | 5x120.65 | 70.3 | 46 |
| 2001 | 5x120.65 | 70.3 | 46 |
| 2002 | 5x120.65 | 70.3 | 46 |
| 2010 | 5x120 | 67.1 | 36 |
| 2011 | 5x120 | 67.1 | 36 |
| 2012 | 5x120 | 67.1 | 36 |
| 2013 | 5x120 | 67.1 | 36 |
| 2014 | 5x120 | 67.1 | 36 |
| 2015 | 5x120 | 67.1 | 36 |
| 2016 | 5x120 | 67.1 | 36 |
| 2017 | 5x120 | 67.1 | 36 |
| 2018 | 5x120 | 67.1 | 36 |
| 2019 | 5x120 | 66.9 | 35 |
| 2020 | 5x120 | 66.9 | 35 |
| 2021 | 5x120 | 66.9 | 35 |
| 2022 | 5x120 | 66.9 | 35 |
| 2023 | 5x120 | 66.9 | 35 |
| 2024 | 5x120 | 66.9 | 35 |
5x120.65 Pattern Context
This bolt pattern appears on 202 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x120.65:
Expert Buying Guide for 1994 Chevrolet Camaro
For your 1994 Chevrolet Camaro, the 5x120.65 bolt pattern is shared with 1992–2002 models, ensuring cross-compatibility. The 70.3mm center bore requires hub-centric rings for aftermarket wheels to prevent vibration and ensure proper load distribution. Offset is critical: stock is 46mm; deviations affect handling and clearance. Always use lug nuts with the correct 12x1.5 thread pitch and conical (60-degree) seat—never ball seat—to avoid wheel loosening. Verify wheel width and offset to avoid rubbing. Safety first: improper fitment compromises braking and suspension.
Historical Fitment Data Reference
In our dataset, Chevrolet Camaro appears from 1992 to 2024 (26 model years). Across model years, this model appears with 2 bolt patterns (5x120, 5x120.65).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 36.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50–100 miles of driving to maintain clamping force.
- ✅ When using aftermarket wheels, always install hub-centric rings to match the 70.3mm center bore.
- ✅ Check for caliper clearance with larger wheels; the 1994 Camaro has tight tolerances near the brake calipers.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1994 Chevrolet Camaro — Frequently Asked Questions
What is the bolt pattern for a 1994 Chevrolet Camaro?
The 1994 Chevrolet Camaro uses a 5x120.65 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 46mm.
What other years of Chevrolet Camaro have the same bolt pattern as the 1994?
The Chevrolet Camaro uses the 5x120.65 pattern from 1992 through 2002. Wheels from any of these model years are dimensionally compatible with the 1994, provided the offset and center bore also match.
Can I put aftermarket wheels on my 1994 Chevrolet Camaro?
Absolutely. Just ensure the aftermarket wheels have a 5x120.65 bolt pattern, an offset near 46mm, and a center bore of at least 70.3mm (using hub rings if larger).
How tight should I torque the lug nuts on a 1994 Chevrolet Camaro?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 1994 Chevrolet Camaro?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1994 Camaro, the PCD is 5x120.65.
What is the center bore of a 1994 Chevrolet Camaro?
The factory center bore (hub bore) for the 1994 Chevrolet Camaro is 70.3mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset