2000 Chevrolet Camaro Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Chevrolet Camaro, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120.65 (5x4.75") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x120.65 is commonly referred to as 5x4.75" in US Standard.
2000 Camaro — Year-Specific Fitment Context
The 2000 Chevrolet Camaro is in year 9 of 11 using the 5x120.65 pattern (1992–2002). Wheels from any 1992–2002 Chevrolet Camaro are cross-compatible with the 2000 model. Across its full production run (1992–2024), the Camaro has also used: 5x120.
Chevrolet Camaro Bolt Pattern by Year
The table below shows how the Camaro's wheel specifications have changed over the years. The 2000 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x120.65 | 70.3 | 10 |
| 1993 | 5x120.65 | 70.3 | 10 |
| 1994 | 5x120.65 | 70.3 | 46 |
| 1995 | 5x120.65 | 70.3 | 46 |
| 1996 | 5x120.65 | 70.3 | 46 |
| 1997 | 5x120.65 | 70.3 | 46 |
| 1998 | 5x120.65 | 70.3 | 46 |
| 1999 | 5x120.65 | 70.3 | 46 |
| ▸ 2000 | 5x120.65 | 70.3 | 46 |
| 2001 | 5x120.65 | 70.3 | 46 |
| 2002 | 5x120.65 | 70.3 | 46 |
| 2010 | 5x120 | 67.1 | 36 |
| 2011 | 5x120 | 67.1 | 36 |
| 2012 | 5x120 | 67.1 | 36 |
| 2013 | 5x120 | 67.1 | 36 |
| 2014 | 5x120 | 67.1 | 36 |
| 2015 | 5x120 | 67.1 | 36 |
| 2016 | 5x120 | 67.1 | 36 |
| 2017 | 5x120 | 67.1 | 36 |
| 2018 | 5x120 | 67.1 | 36 |
| 2019 | 5x120 | 66.9 | 35 |
| 2020 | 5x120 | 66.9 | 35 |
| 2021 | 5x120 | 66.9 | 35 |
| 2022 | 5x120 | 66.9 | 35 |
| 2023 | 5x120 | 66.9 | 35 |
| 2024 | 5x120 | 66.9 | 35 |
5x120.65 Pattern Context
This bolt pattern appears on 202 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x120.65:
Expert Buying Guide for 2000 Chevrolet Camaro
For your 2000 Chevrolet Camaro, the bolt pattern is 5x120.65mm with a center bore of 70.3mm. When selecting aftermarket wheels, ensure they are hub-centric or use hub-centric rings to prevent vibrations. The factory offset is 46mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut compatibility: this model uses 12x1.50 thread pitch with a conical (60-degree) seat. Using incorrect lug nuts can lead to wheel detachment. Wheels from 1992–2002 Camaros are direct fit. Avoid wheels with a larger center bore without proper rings.
Historical Fitment Data Reference
In our dataset, Chevrolet Camaro appears from 1992 to 2024 (26 model years). Across model years, this model appears with 2 bolt patterns (5x120, 5x120.65).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 36.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lbs after 50 miles of driving.
- ✅ If using aftermarket wheels, confirm the hub bore is at least 70.3mm; use hub-centric rings if larger.
- ✅ Check inner clearance for offset changes; 46mm offset is optimal for stock suspension.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 Chevrolet Camaro — Frequently Asked Questions
What is the bolt pattern for a 2000 Chevrolet Camaro?
The 2000 Chevrolet Camaro uses a 5x120.65 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 46mm.
What other years of Chevrolet Camaro have the same bolt pattern as the 2000?
The Chevrolet Camaro uses the 5x120.65 pattern from 1992 through 2002. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
What is the center bore of a 2000 Chevrolet Camaro?
The factory center bore (hub bore) for the 2000 Chevrolet Camaro is 70.3mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Will wheels from another Chevrolet fit my 2000 Camaro?
Only if they share the exact same 5x120.65 bolt pattern, a compatible offset, and a center bore equal to or larger than 70.3mm.
Why is matching the 70.3mm center bore important for the 2000 Camaro?
The 70.3mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What lug nut size does the 2000 Chevrolet Camaro use?
The 2000 Chevrolet Camaro uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset