2018 Chevrolet Camaro Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Chevrolet Camaro, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 36 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2018 Camaro — Year-Specific Fitment Context
The 2018 Chevrolet Camaro is in year 9 of 15 using the 5x120 pattern (2010–2024). Wheels from any 2010–2024 Chevrolet Camaro are cross-compatible with the 2018 model. Across its full production run (1992–2024), the Camaro has also used: 5x120.65.
Chevrolet Camaro Bolt Pattern by Year
The table below shows how the Camaro's wheel specifications have changed over the years. The 2018 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x120.65 | 70.3 | 10 |
| 1993 | 5x120.65 | 70.3 | 10 |
| 1994 | 5x120.65 | 70.3 | 46 |
| 1995 | 5x120.65 | 70.3 | 46 |
| 1996 | 5x120.65 | 70.3 | 46 |
| 1997 | 5x120.65 | 70.3 | 46 |
| 1998 | 5x120.65 | 70.3 | 46 |
| 1999 | 5x120.65 | 70.3 | 46 |
| 2000 | 5x120.65 | 70.3 | 46 |
| 2001 | 5x120.65 | 70.3 | 46 |
| 2002 | 5x120.65 | 70.3 | 46 |
| 2010 | 5x120 | 67.1 | 36 |
| 2011 | 5x120 | 67.1 | 36 |
| 2012 | 5x120 | 67.1 | 36 |
| 2013 | 5x120 | 67.1 | 36 |
| 2014 | 5x120 | 67.1 | 36 |
| 2015 | 5x120 | 67.1 | 36 |
| 2016 | 5x120 | 67.1 | 36 |
| 2017 | 5x120 | 67.1 | 36 |
| ▸ 2018 | 5x120 | 67.1 | 36 |
| 2019 | 5x120 | 66.9 | 35 |
| 2020 | 5x120 | 66.9 | 35 |
| 2021 | 5x120 | 66.9 | 35 |
| 2022 | 5x120 | 66.9 | 35 |
| 2023 | 5x120 | 66.9 | 35 |
| 2024 | 5x120 | 66.9 | 35 |
5x120 Pattern Context
This bolt pattern appears on 633 vehicles in our current database and is considered common.
Examples of other vehicles using 5x120:
Expert Buying Guide for 2018 Chevrolet Camaro
The 2018 Chevrolet Camaro uses a 5x120 bolt pattern with a 67.1mm center bore and a recommended offset of 36mm. When selecting aftermarket wheels, ensure the center bore is at least 67.1mm; if larger, use hub-centric rings to prevent vibrations and ensure proper load distribution. Offset is critical: staying within ±5mm of 36mm maintains suspension geometry and avoids rubbing. Always use lug nuts with the correct thread pitch (14x1.50) and seat type (conical/60-degree taper). Never use ball-seat lug nuts, as they can loosen. Re-torque lug nuts after 50-100 miles of driving. Cross-compatible with 2010–2024 Camaro models, but avoid 5x120.65 wheels from earlier generations without adapters.
Historical Fitment Data Reference
In our dataset, Chevrolet Camaro appears from 1992 to 2024 (26 model years). Across model years, this model appears with 2 bolt patterns (5x120, 5x120.65).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 36.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lb after 50-100 miles of driving.
- ✅ Use hub-centric rings if aftermarket wheels have a larger center bore than 67.1mm.
- ✅ Verify offset clearance: offsets below 31mm may rub fenders; above 41mm may contact suspension.
- ⚠️ Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2018 Chevrolet Camaro — Frequently Asked Questions
What is the bolt pattern for a 2018 Chevrolet Camaro?
The 2018 Chevrolet Camaro uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 36mm.
What other years of Chevrolet Camaro have the same bolt pattern as the 2018?
The Chevrolet Camaro uses the 5x120 pattern from 2010 through 2024. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
Do 2018 Chevrolet Camaros use lug bolts or lug nuts?
The 2018 Camaro requires N 14x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the factory wheel offset for a 2018 Chevrolet Camaro?
The OEM offset for the 2018 Camaro is typically around 36mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 2018 Chevrolet Camaro?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2018 Camaro, the PCD is 5x120.
Can I use spacers on my 2018 Chevrolet Camaro?
Yes, but ensure the wheel spacers match the 5x120 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 14x1.50 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset