2018 Maserati Levante Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Maserati Levante, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2018 Levante — Year-Specific Fitment Context
The 2018 Maserati Levante is in year 2 of 8 using the 5x114.3 pattern (2017–2024). Wheels from any 2017–2024 Maserati Levante are cross-compatible with the 2018 model.
Maserati Levante Bolt Pattern by Year
The table below shows how the Levante's wheel specifications have changed over the years. The 2018 model year is highlighted.
Fitment Notes
The 2018 Maserati Levante has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Maserati Levante appears from 2017 to 2024 (6 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
2018 Maserati Levante — Frequently Asked Questions
What is the bolt pattern for a 2018 Maserati Levante?
The 2018 Maserati Levante uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45mm.
What other years of Maserati Levante have the same bolt pattern as the 2018?
The Maserati Levante uses the 5x114.3 pattern from 2017 through 2024. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2018 Maserati Levante?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 45mm, and a center bore of at least 67.1mm (using hub rings if larger).
What is the PCD for a 2018 Maserati Levante?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2018 Levante, the PCD is 5x114.3.
What is the factory wheel offset for a 2018 Maserati Levante?
The OEM offset for the 2018 Levante is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 2018 Maserati Levante?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Fitment Checklist Before You Buy Wheels
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Maserati Levante is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2017-2024 (6 model years).
- Observed bolt-pattern variants: 1 (5x114.3).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2018 Maserati Levante, please report it via our About page contact so we can verify and update this record.