1993 MAZDA 626 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1993 MAZDA 626, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1993 626 — Year-Specific Fitment Context
The 1993 MAZDA 626 is in year 2 of 11 using the 5x114.3 pattern (1992–2002). Wheels from any 1992–2002 MAZDA 626 are cross-compatible with the 1993 model.
MAZDA 626 Bolt Pattern by Year
The table below shows how the 626's wheel specifications have changed over the years. The 1993 model year is highlighted.
Fitment Notes
The 1993 MAZDA 626 has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, MAZDA 626 appears from 1992 to 2002 (11 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 5.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
1993 MAZDA 626 — Frequently Asked Questions
What is the bolt pattern for a 1993 MAZDA 626?
The 1993 MAZDA 626 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45mm.
What other years of MAZDA 626 have the same bolt pattern as the 1993?
The MAZDA 626 uses the 5x114.3 pattern from 1992 through 2002. Wheels from any of these model years are dimensionally compatible with the 1993, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 1993 MAZDA 626?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Will wheels from another MAZDA fit my 1993 626?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Can I use spacers on my 1993 MAZDA 626?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
What does 45mm offset mean for the 1993 626?
An offset of 45mm means the wheel's mounting surface is 45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your MAZDA.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
MAZDA 626 is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1992-2002 (11 model years).
- Observed bolt-pattern variants: 1 (5x114.3).
- Observed total offset span across years: 5.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1993 MAZDA 626, please report it via our About page contact so we can verify and update this record.