2017 MAZDA MX-5 Miata RF Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2017 MAZDA MX-5 Miata RF, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Lug Nut / Bolt Size N 12x1.50
Center Bore (CB) 67.1 mm
Offset (ET) 52,5
Torque Specs 80 ft-lbs (108 Nm)

2017 MX-5 Miata RF — Year-Specific Fitment Context

The 2017 is the only model year of the MAZDA MX-5 Miata RF in our database using the 5x114.3 bolt pattern. Important: starting in 2018, MAZDA switched to 4x100 — those wheels will not fit the 2017 model. Across its full production run (2017–2022), the MX-5 Miata RF has also used: 4x100.

MAZDA MX-5 Miata RF Bolt Pattern by Year

The table below shows how the MX-5 Miata RF's wheel specifications have changed over the years. The 2017 model year is highlighted.

Year Bolt Pattern Center Bore Offset
▸ 2017 5x114.3 67.1 52,5
2018 4x100 54.1 45
2019 4x100 54.1 45
2020 4x100 54.1 45
2021 4x100 54.1 45
2022 4x100 54.1 45

Fitment Notes

The 2017 MAZDA MX-5 Miata RF has a bolt pattern of 5x114.3.

Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".

This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, MAZDA MX-5 Miata RF appears from 2017 to 2022 (6 model years).

Across model years, this model appears with 2 bolt patterns (4x100, 5x114.3).

5x114.3 Pattern Context

This bolt pattern appears on 2902 vehicles in our current database and is considered very common.

Examples of other vehicles using 5x114.3:

2017 MAZDA MX-5 Miata RF — Frequently Asked Questions

What is the bolt pattern for a 2017 MAZDA MX-5 Miata RF?

The 2017 MAZDA MX-5 Miata RF uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 52,5mm.

Will 2018 MAZDA MX-5 Miata RF wheels fit a 2017 model?

No. The 2018 MAZDA MX-5 Miata RF switched to a 4x100 bolt pattern, which is not compatible with the 2017 model's 5x114.3. Using mismatched patterns is unsafe.

How do I measure the bolt pattern on my 2017 MAZDA?

The 2017 MX-5 Miata RF uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.

What lug nut size does the 2017 MAZDA MX-5 Miata RF use?

The 2017 MAZDA MX-5 Miata RF uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.

How tight should I torque the lug nuts on a 2017 MAZDA MX-5 Miata RF?

Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.

What is the center bore of a 2017 MAZDA MX-5 Miata RF?

The factory center bore (hub bore) for the 2017 MAZDA MX-5 Miata RF is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

MAZDA MX-5 Miata RF has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 2017 MAZDA MX-5 Miata RF, please report it via our About page contact so we can verify and update this record.

MAZDA MX-5 Miata RF By Year

2017 2018 2019 2020 2021 2022

Other MAZDA Models

323 626 929 B-Series Cab Plus B-Series Extended Cab B-Series Regular Cab CX-3 CX-5 CX-70 CX-90 PHEV MAZDA2 MAZDA6 MPV MX-30 MX-5 Miata RF MX-6 Navajo Protege Protege5 RX-7