2025 McLaren Artura Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 McLaren Artura is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of Front: +55mm, Rear: +60mm, and utilizes 14x1.5 (Ball seat, 17mm hex) fasteners tightened to 140 Nm (103 lb-ft).
2025 McLaren Artura Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | Front: +55mm, Rear: +60mm |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 17mm |
| Wheel Torque Specs | 140 Nm (103 lb-ft) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2025 Artura — Year-Specific Fitment Context
The 2025 McLaren Artura is in year 2 of 3 using the 5x114.3 pattern (2024–2026). Wheels from any 2024–2026 McLaren Artura are cross-compatible with the 2025 model.
McLaren Artura Bolt Pattern by Year
Looking for all generations? View the complete McLaren Artura (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the Artura's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 McLaren Artura Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2025 McLaren Artura, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2026 Mitsubishi Eclipse Cross | 67.1 mm (Exact) | 40-46 | 12x1.5 (Flat) |
| 2006 Mitsubishi Galant | 67.1 mm (Exact) | 38-46 | 12x1.5 (Cone) |
| 2007 Mitsubishi Lancer | 67.1 mm (Exact) | 46 | N 12x1.50 (Cone) |
| 2015 Mitsubishi Lancer Evolution | 67.1 mm (Exact) | 46 | N 12x1.50 (Cone) |
| 2025 Mitsubishi Outlander | 67.1 mm (Exact) | 35-45 | 12x1.5 (Flat) |
| 2025 Mitsubishi Outlander PHEV | 67.1 mm (Exact) | 38-46 | 12x1.5 (Cone) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2003 Pontiac Grand Prix | 70.3 mm | 70.3mm → 67.1mm |
52 |
| 2002 Toyota 4Runner | 106.1 mm | 106.1mm → 67.1mm |
12 |
| 2015 Aston Martin DB9 | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
| 2016 Aston Martin DB9 GT | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
| 2021 Aston Martin DBS Superleggera | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
| 2025 Aston Martin DBX | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 140 Nm (103 lb-ft), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 McLaren Artura — Frequently Asked Questions
What is the bolt pattern for a 2025 McLaren Artura?
The 2025 McLaren Artura uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is Front: +55mm, Rear: +60mmmm.
What other years of McLaren Artura have the same bolt pattern as the 2025?
The McLaren Artura uses the 5x114.3 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
What is the PCD for a 2025 McLaren Artura?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2025 Artura, the PCD is 5x114.3.
Will wheels from another McLaren fit my 2025 Artura?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
What is the center bore of a 2025 McLaren Artura?
The factory center bore (hub bore) for the 2025 McLaren Artura is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What does Front: +55mm, Rear: +60mmmm offset mean for the 2025 Artura?
An offset of Front: +55mm, Rear: +60mmmm means the wheel's mounting surface is Front: +55mm, Rear: +60mmmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your McLaren.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →