2024 McLaren Artura Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 McLaren Artura, along with offset and center bore data.
2024 McLaren Artura Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | Front: +55mm, Rear: +60mm |
| Torque Specs | 140 Nm (103 lb-ft) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2024 Artura — Year-Specific Fitment Context
The 2024 model year marks the beginning of the McLaren Artura's 5x114.3 bolt pattern era, which continued through 2025 (2 consecutive years). Wheels from any 2024–2025 McLaren Artura are cross-compatible with the 2024 model.
McLaren Artura Bolt Pattern by Year
The table below shows how the Artura's wheel specifications have changed over the years. The 2024 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 2024 | 5x114.3 | 67.1 | Front: +55mm, Rear: +60mm |
| 2025 | 5x114.3 | 67.1 | Front: +55mm, Rear: +60mm |
5x114.3 Pattern Context
This bolt pattern appears on 3207 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 140 Nm (103 lb-ft), then re-check torque after 50-100 km (30-60 miles).
2024 McLaren Artura — Frequently Asked Questions
What is the bolt pattern for a 2024 McLaren Artura?
The 2024 McLaren Artura uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is Front: +55mm, Rear: +60mmmm.
What other years of McLaren Artura have the same bolt pattern as the 2024?
The McLaren Artura uses the 5x114.3 pattern from 2024 through 2025. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
What is the center bore of a 2024 McLaren Artura?
The factory center bore (hub bore) for the 2024 McLaren Artura is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I use spacers on my 2024 McLaren Artura?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
What is the factory wheel offset for a 2024 McLaren Artura?
The OEM offset for the 2024 Artura is typically around Front: +55mm, Rear: +60mmmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 2024 McLaren Artura?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2024 Artura, the PCD is 5x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset