2026 McLaren Artura Bolt Pattern

Quick Answer: The factory bolt pattern (lug pattern) for a 2026 McLaren Artura is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of Front: +55mm, Rear: +60mm, and utilizes 14x1.5 (Ball seat, 17mm hex) fasteners tightened to 140 Nm (103 lb-ft).

2026 McLaren Artura Wheel Fitment Specs

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Center Bore (Hub Bore) 67.1 mm
Offset Range (ET) Front: +55mm, Rear: +60mm
Thread Size (Lug Nut / Bolt) 14x1.5
Fastener Seat Type Radius / Spherical (Ball Seat)
Lug Wrench / Socket Hex Size 17mm
Wheel Torque Specs 140 Nm (103 lb-ft)
💡

Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.

🛠️ Managing a shop, wheel inventory, or app? Stop searching one by one.
Download 12,902 Vehicle Database (CSV) →
🔍 Check fitment for other vehicles using our Ultimate Bolt Pattern Finder tool →

2026 Artura — Year-Specific Fitment Context

The 2026 model year is the final year of the McLaren Artura's 5x114.3 bolt pattern run (since 2024). Wheels from any 2024–2026 McLaren Artura are cross-compatible with the 2026 model.

McLaren Artura Bolt Pattern by Year

Looking for all generations? View the complete McLaren Artura (2024–2026) Bolt Pattern & Generation Guide →

The table below shows how the Artura's wheel specifications have changed over the years. The 2026 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2024 5x114.3 67.1 Front: +55mm, Rear: +60mm
2025 5x114.3 67.1 Front: +55mm, Rear: +60mm
▸ 2026 5x114.3 67.1 Front: +55mm, Rear: +60mm

2026 McLaren Artura Wheel Interchange & Donor Fitment Guide (5x114.3)

The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 McLaren Artura, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:

DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)

Compatible Donor Vehicle Center Bore OEM Offset (ET) Lug Thread & Seat
2024 Ferrari 812 67.1 mm (Exact) Front: +32mm, Rear: +40mm 14x1.5 (Ball)
2022 Ferrari 812 Competizione 67.1 mm (Exact) 45 14x1.5 (Ball)
2022 Ferrari 812 Competizione A 67.1 mm (Exact) 45 14x1.5 (Ball)
2022 Ferrari 812 GTS 67.1 mm (Exact) 45 14x1.5 (Ball)
2021 Ferrari 812 Superfast 67.1 mm (Exact) 45 14x1.5 (Ball)
2017 Ferrari California 67.1 mm (Exact) 44 front, 53 rear N 14x1.50 (Cone)

HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)

Donor Vehicle Donor Bore Required Hub Ring (OD → ID) OEM Offset (ET)
1994 Ford Explorer 87.1 mm 87.1mm → 67.1mm 44
1993 Ford Mustang 70.3 mm 70.3mm → 67.1mm 30
2025 Ford Mustang GTD 70.5 mm 70.5mm → 67.1mm Not Applicable
1994 Ford Ranger Regular Cab 70.3 mm 70.3mm → 67.1mm 12-20
1996 Ford Ranger SuperCab 70.3 mm 70.3mm → 67.1mm 12-20
1997 Jeep Wrangler 71.6 mm 71.6mm → 67.1mm 25
Looking for all models? View the complete directory of vehicles with 5x114.3 bolt pattern →

Quick Tips & Safety Warnings

Ready to upgrade or perform maintenance?

🛒 Shop Tools & Accessories on Amazon

As an Amazon Associate, I earn from qualifying purchases.

2026 McLaren Artura — Frequently Asked Questions

What is the bolt pattern for a 2026 McLaren Artura?

The 2026 McLaren Artura uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is Front: +55mm, Rear: +60mmmm.

What other years of McLaren Artura have the same bolt pattern as the 2026?

The McLaren Artura uses the 5x114.3 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.

Can I use spacers on my 2026 McLaren Artura?

Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.

What is the PCD for a 2026 McLaren Artura?

PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2026 Artura, the PCD is 5x114.3.

How tight should I torque the lug nuts on a 2026 McLaren Artura?

Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.

What is the factory wheel offset for a 2026 McLaren Artura?

The OEM offset for the 2026 Artura is typically around Front: +55mm, Rear: +60mmmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

For Tire & Wheel Shops, Shopify Stores & Developers

Running a Tire Shop or Wheel Store?

Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.

Get Master Spreadsheet (CSV) →
Confidence Level
Medium
Verified Source
Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last Updated
2026-11-18

McLaren Artura By Year

2024 2025 2026

Other McLaren Models

570GT 570S 600LT 650S 675LT 720S 750S Artura GTS MP4-12C

Popular Vehicle Fitment

▶ Ford Mustang Specs ▶ Chevy Tahoe Specs ▶ Honda Civic Specs ▶ Ford F-150 Specs ▶ Toyota Camry Specs

Common Bolt Patterns

▶ 5x114.3 (5x4.5") ▶ 6x139.7 (6x5.5") ▶ 5x120 ▶ 5x127 (5x5") ▶ 5x112 (European)