1993 MAZDA MX-6 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1993 MAZDA MX-6, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1993 MX-6 — Year-Specific Fitment Context
The 1993 MAZDA MX-6 is in year 2 of 6 using the 5x114.3 pattern (1992–1997). Wheels from any 1992–1997 MAZDA MX-6 are cross-compatible with the 1993 model.
MAZDA MX-6 Bolt Pattern by Year
The table below shows how the MX-6's wheel specifications have changed over the years. The 1993 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1993 MAZDA MX-6
For your 1993 Mazda MX-6, the 5x114.3 bolt pattern is shared with 1992–1997 models. The 67.1mm center bore is critical; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive: the factory 45mm offset maintains suspension geometry and brake clearance; deviations of ±5mm may cause rubbing or handling issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (cone or ball seat, matching the wheel). Improper lug nuts can loosen or damage the wheel. Safety first: verify all specs before installation.
Historical Fitment Data Reference
In our dataset, MAZDA MX-6 appears from 1992 to 1997 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50 miles of driving to ensure proper seating.
- ✅ If using aftermarket wheels, confirm hub-centric ring inner diameter matches 67.1mm and outer diameter matches the wheel's bore.
- ✅ Avoid spacers unless necessary; they alter offset and may require longer studs, increasing stress on wheel bearings.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1993 MAZDA MX-6 — Frequently Asked Questions
What is the bolt pattern for a 1993 MAZDA MX-6?
The 1993 MAZDA MX-6 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45mm.
What other years of MAZDA MX-6 have the same bolt pattern as the 1993?
The MAZDA MX-6 uses the 5x114.3 pattern from 1992 through 1997. Wheels from any of these model years are dimensionally compatible with the 1993, provided the offset and center bore also match.
Why is matching the 67.1mm center bore important for the 1993 MX-6?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How do I measure the bolt pattern on my 1993 MAZDA?
The 1993 MX-6 uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 1993 MAZDA MX-6?
The factory center bore (hub bore) for the 1993 MAZDA MX-6 is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Do 1993 MAZDA MX-6s use lug bolts or lug nuts?
The 1993 MX-6 requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset