1992 MAZDA Protege Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1992 MAZDA Protege, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 45-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1992 Protege — Year-Specific Fitment Context
The 1992 model year marks the beginning of the MAZDA Protege's 5x114.3 bolt pattern era, which continued through 2003 (12 consecutive years). Wheels from any 1992–2003 MAZDA Protege are cross-compatible with the 1992 model.
MAZDA Protege Bolt Pattern by Year
The table below shows how the Protege's wheel specifications have changed over the years. The 1992 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 1992 | 5x114.3 | 67.1 | 45-50 |
| 1993 | 5x114.3 | 67.1 | 45-50 |
| 1994 | 5x114.3 | 67.1 | 45-50 |
| 1995 | 5x114.3 | 67.1 | 45-50 |
| 1996 | 5x114.3 | 67.1 | 45-50 |
| 1997 | 5x114.3 | 67.1 | 45-50 |
| 1998 | 5x114.3 | 67.1 | 45-50 |
| 1999 | 5x114.3 | 67.1 | 45-50 |
| 2000 | 5x114.3 | 67.1 | 45-50 |
| 2001 | 5x114.3 | 67.1 | 45-50 |
| 2002 | 5x114.3 | 67.1 | 45-50 |
| 2003 | 5x114.3 | 67.1 | 45-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1992 MAZDA Protege
For your 1992 MAZDA Protege, the bolt pattern is 5x114.3 with a center bore of 67.1mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The offset range is 45-50mm; staying within this range avoids rubbing on suspension or fenders. Always use the correct lug nuts: 12x1.5 thread pitch with a conical (60-degree) or ball seat, matching the wheel's seat type. Improper lug nuts can cause wheel loosening. Verify that aftermarket wheels are hub-centric or use rings, and re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, MAZDA Protege appears from 1992 to 2003 (12 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 95.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels with a larger center bore, install hub-centric rings (67.1mm inner diameter) to avoid vibrations.
- ✅ Avoid wheels with offset below 45mm or above 50mm to prevent clearance issues with struts or fenders.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1992 MAZDA Protege — Frequently Asked Questions
What is the bolt pattern for a 1992 MAZDA Protege?
The 1992 MAZDA Protege uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45-50mm.
What other years of MAZDA Protege have the same bolt pattern as the 1992?
The MAZDA Protege uses the 5x114.3 pattern from 1992 through 2003. Wheels from any of these model years are dimensionally compatible with the 1992, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 1992 MAZDA Protege?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Why is matching the 67.1mm center bore important for the 1992 Protege?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Will wheels from another MAZDA fit my 1992 Protege?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
What does 45-50mm offset mean for the 1992 Protege?
An offset of 45-50mm means the wheel's mounting surface is 45-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your MAZDA.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset