1998 MAZDA Protege Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1998 MAZDA Protege, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 45-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1998 Protege — Year-Specific Fitment Context
The 1998 MAZDA Protege is in year 7 of 12 using the 5x114.3 pattern (1992–2003). Wheels from any 1992–2003 MAZDA Protege are cross-compatible with the 1998 model.
MAZDA Protege Bolt Pattern by Year
The table below shows how the Protege's wheel specifications have changed over the years. The 1998 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 67.1 | 45-50 |
| 1993 | 5x114.3 | 67.1 | 45-50 |
| 1994 | 5x114.3 | 67.1 | 45-50 |
| 1995 | 5x114.3 | 67.1 | 45-50 |
| 1996 | 5x114.3 | 67.1 | 45-50 |
| 1997 | 5x114.3 | 67.1 | 45-50 |
| ▸ 1998 | 5x114.3 | 67.1 | 45-50 |
| 1999 | 5x114.3 | 67.1 | 45-50 |
| 2000 | 5x114.3 | 67.1 | 45-50 |
| 2001 | 5x114.3 | 67.1 | 45-50 |
| 2002 | 5x114.3 | 67.1 | 45-50 |
| 2003 | 5x114.3 | 67.1 | 45-50 |
Fitment Notes
The 1998 MAZDA Protege has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, MAZDA Protege appears from 1992 to 2003 (12 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 95.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
1998 MAZDA Protege — Frequently Asked Questions
What is the bolt pattern for a 1998 MAZDA Protege?
The 1998 MAZDA Protege uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45-50mm.
What other years of MAZDA Protege have the same bolt pattern as the 1998?
The MAZDA Protege uses the 5x114.3 pattern from 1992 through 2003. Wheels from any of these model years are dimensionally compatible with the 1998, provided the offset and center bore also match.
How do I measure the bolt pattern on my 1998 MAZDA?
The 1998 Protege uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Do 1998 MAZDA Proteges use lug bolts or lug nuts?
The 1998 Protege requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the factory wheel offset for a 1998 MAZDA Protege?
The OEM offset for the 1998 Protege is typically around 45-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Will wheels from another MAZDA fit my 1998 Protege?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
MAZDA Protege is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1992-2003 (12 model years).
- Observed bolt-pattern variants: 1 (5x114.3).
- Observed total offset span across years: 95.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1998 MAZDA Protege, please report it via our About page contact so we can verify and update this record.