1993 Mercedes-Benz 500 SEL Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1993 Mercedes-Benz 500 SEL, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 5x112
Lug Nut / Bolt Size 14x1.5
Center Bore (CB) 66.6 mm
Offset (ET) 30-50
Torque Specs 100 ft-lbs (135 Nm)

1993 500 SEL — Year-Specific Fitment Context

The 1993 model year is the final year of the Mercedes-Benz 500 SEL's 5x112 bolt pattern run (since 1992). Wheels from any 1992–1993 Mercedes-Benz 500 SEL are cross-compatible with the 1993 model.

Mercedes-Benz 500 SEL Bolt Pattern by Year

The table below shows how the 500 SEL's wheel specifications have changed over the years. The 1993 model year is highlighted.

Year Bolt Pattern Center Bore Offset
1992 5x112 66.6 30-50
▸ 1993 5x112 66.6 30-50

Fitment Notes

The 1993 Mercedes-Benz 500 SEL has a bolt pattern of 5x112.

This means it is a 5 lug pattern with a circle diameter of 112mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Mercedes-Benz 500 SEL appears from 1992 to 1993 (2 model years).

Across recorded model years, this model generally keeps the same bolt pattern.

5x112 Pattern Context

This bolt pattern appears on 1490 vehicles in our current database and is considered common.

Examples of other vehicles using 5x112:

1993 Mercedes-Benz 500 SEL — Frequently Asked Questions

What is the bolt pattern for a 1993 Mercedes-Benz 500 SEL?

The 1993 Mercedes-Benz 500 SEL uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 30-50mm.

What other years of Mercedes-Benz 500 SEL have the same bolt pattern as the 1993?

The Mercedes-Benz 500 SEL uses the 5x112 pattern from 1992 through 1993. Wheels from any of these model years are dimensionally compatible with the 1993, provided the offset and center bore also match.

What is the factory wheel offset for a 1993 Mercedes-Benz 500 SEL?

The OEM offset for the 1993 500 SEL is typically around 30-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

Will wheels from another Mercedes-Benz fit my 1993 500 SEL?

Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.6mm.

How tight should I torque the lug nuts on a 1993 Mercedes-Benz 500 SEL?

Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.

Can I use spacers on my 1993 Mercedes-Benz 500 SEL?

Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 66.6mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Mercedes-Benz 500 SEL is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 1993 Mercedes-Benz 500 SEL, please report it via our About page contact so we can verify and update this record.

Mercedes-Benz 500 SEL By Year

1992 1993

Other Mercedes-Benz Models

300 SD 300 TE 400 SE 500 SEC C-Class CLA-Class E-Class GL-Class GLC Coupe Mercedes-AMG GLS Mercedes-AMG SL Mercedes-AMG SLC Mercedes-EQ EQE Mercedes-EQ EQE SUV Metris Cargo Metris Passenger R-Class SLK Sprinter 2500 Crew Sprinter WORKER Passenger