2024 Mercedes-Benz CLE Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Mercedes-Benz CLE, along with offset and center bore data.
2024 Mercedes-Benz CLE Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 30-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2024 CLE — Year-Specific Fitment Context
The 2024 model year marks the beginning of the Mercedes-Benz CLE's 5x112 bolt pattern era, which continued through 2025 (2 consecutive years). Wheels from any 2024–2025 Mercedes-Benz CLE are cross-compatible with the 2024 model.
Mercedes-Benz CLE Bolt Pattern by Year
The table below shows how the CLE's wheel specifications have changed over the years. The 2024 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 2024 | 5x112 | 66.6 | 30-50 |
| 2025 | 5x112 | 66.5 | 35-45 |
5x112 Pattern Context
This bolt pattern appears on 1661 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2024 Mercedes-Benz CLE
For the 2024 Mercedes-Benz CLE, the 5x112 bolt pattern and 66.6mm center bore are critical. Aftermarket wheels must use hub-centric rings to ensure proper load distribution and prevent vibrations. The offset range is 30-50mm; deviating can cause rubbing or clearance issues. Always use lug nuts with the correct 14x1.5 thread pitch and ball seat (R14) to match OEM specifications. Improper seating can lead to wheel loosening. Verify all fitments with a test fit before final installation.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz CLE appears from 2024 to 2025 (2 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using conical seat lug nuts; the CLE requires ball seat (R14) for safe fitment.
- ✅ Check inner clearance for aftermarket wheels; offset below 30mm may contact suspension components.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
2024 Mercedes-Benz CLE — Frequently Asked Questions
What is the bolt pattern for a 2024 Mercedes-Benz CLE?
The 2024 Mercedes-Benz CLE uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 30-50mm.
What other years of Mercedes-Benz CLE have the same bolt pattern as the 2024?
The Mercedes-Benz CLE uses the 5x112 pattern from 2024 through 2025. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
What is the center bore of a 2024 Mercedes-Benz CLE?
The factory center bore (hub bore) for the 2024 Mercedes-Benz CLE is 66.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 2024 Mercedes-Benz CLE?
The OEM offset for the 2024 CLE is typically around 30-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 2024 Mercedes-Benz CLE?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2024 Mercedes-Benz?
The 2024 CLE uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset