2026 Mercedes-Benz CLE Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Mercedes-Benz CLE is 5x112. It has a center bore of 66.6 mm, an offset range of 35-45, and utilizes 14x1.5 (Ball seat, 17mm hex) fasteners tightened to 96 ft-lbs (130 Nm).
2026 Mercedes-Benz CLE Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Center Bore (Hub Bore) | 66.6 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 17mm |
| Wheel Torque Specs | 96 ft-lbs (130 Nm) |
2026 CLE — Year-Specific Fitment Context
The 2026 model year is the final year of the Mercedes-Benz CLE's 5x112 bolt pattern run (since 2024). Wheels from any 2024–2026 Mercedes-Benz CLE are cross-compatible with the 2026 model.
Mercedes-Benz CLE Bolt Pattern by Year
Looking for all generations? View the complete Mercedes-Benz CLE (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the CLE's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Mercedes-Benz CLE Wheel Interchange & Donor Fitment Guide (5x112)
The 5x112 bolt pattern is shared by 1795 vehicles in our database (very common). For safe wheel swaps on the 2026 Mercedes-Benz CLE, donor rims must match the 5x112 PCD and have a center bore of at least 66.6 mm:
DIRECT HUB MATCH Same 5x112 Pattern & Exact 66.6mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2009 Audi A4 | 66.6 mm (Exact) | 45 | B 14x1.50 (Ball) |
| 2025 Audi A4 allroad | 66.5 mm (Exact) | 40-45 | 14x1.5 (Ball) |
| 2023 Audi A5 | 66.5 mm (Exact) | 30-45 | 14x1.5 (Ball) |
| 2017 Audi A5 Sport | 66.6 mm (Exact) | 29 | B 14x1.50 (Ball) |
| 2018 Audi A6 | 66.6 mm (Exact) | 30-45 | 14x1.5 (Ball) |
| 2025 Audi A6 allroad | 66.5 mm (Exact) | 35-45 | 14x1.5 (Ball) |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 96 ft-lbs (130 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Mercedes-Benz CLE — Frequently Asked Questions
What is the bolt pattern for a 2026 Mercedes-Benz CLE?
The 2026 Mercedes-Benz CLE uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 35-45mm.
What other years of Mercedes-Benz CLE have the same bolt pattern as the 2026?
The Mercedes-Benz CLE uses the 5x112 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
Do 2026 Mercedes-Benz CLEs use lug bolts or lug nuts?
The 2026 CLE requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2026 Mercedes-Benz CLE?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2026 CLE, the PCD is 5x112.
How tight should I torque the lug nuts on a 2026 Mercedes-Benz CLE?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2026 Mercedes-Benz?
The 2026 CLE uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →