2020 Mercedes-Benz Metris WORKER Passenger Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Mercedes-Benz Metris WORKER Passenger, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 30-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2020 Metris WORKER Passenger — Year-Specific Fitment Context
The 2020 model year is the final year of the Mercedes-Benz Metris WORKER Passenger's 5x112 bolt pattern run (since 2017). Wheels from any 2017–2020 Mercedes-Benz Metris WORKER Passenger are cross-compatible with the 2020 model.
Mercedes-Benz Metris WORKER Passenger Bolt Pattern by Year
The table below shows how the Metris WORKER Passenger's wheel specifications have changed over the years. The 2020 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2020 Mercedes-Benz Metris WORKER Passenger
For your 2020 Mercedes-Benz Metris WORKER Passenger, the 5x112 bolt pattern and 66.6mm center bore are critical. Aftermarket wheels must have a 66.6mm bore or use hub-centric rings to prevent vibration and ensure load is on the hub, not the lug nuts. Offset must stay within 30-50mm; deviating can cause rubbing or poor handling. Always use 14x1.5 lug nuts with the correct seat (cone or ball) matching your wheel. Improper thread pitch or seat type risks wheel detachment. Verify compatibility with 2017-2020 Metris models for used wheels.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz Metris WORKER Passenger appears from 2017 to 2020 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and stress on studs.
- ✅ Check that aftermarket wheels clear the brake calipers, as the Metris has large front brakes.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Mercedes-Benz Metris WORKER Passenger — Frequently Asked Questions
What is the bolt pattern for a 2020 Mercedes-Benz Metris WORKER Passenger?
The 2020 Mercedes-Benz Metris WORKER Passenger uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 30-50mm.
What other years of Mercedes-Benz Metris WORKER Passenger have the same bolt pattern as the 2020?
The Mercedes-Benz Metris WORKER Passenger uses the 5x112 pattern from 2017 through 2020. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2020 Mercedes-Benz?
The 2020 Metris WORKER Passenger uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2020 Mercedes-Benz Metris WORKER Passenger?
The factory center bore (hub bore) for the 2020 Mercedes-Benz Metris WORKER Passenger is 66.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Do 2020 Mercedes-Benz Metris WORKER Passengers use lug bolts or lug nuts?
The 2020 Metris WORKER Passenger requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I put aftermarket wheels on my 2020 Mercedes-Benz Metris WORKER Passenger?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 30-50mm, and a center bore of at least 66.6mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset