2019 Mercedes-Benz Metris WORKER Passenger Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Mercedes-Benz Metris WORKER Passenger, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 30-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2019 Metris WORKER Passenger — Year-Specific Fitment Context
The 2019 Mercedes-Benz Metris WORKER Passenger is in year 3 of 4 using the 5x112 pattern (2017–2020). Wheels from any 2017–2020 Mercedes-Benz Metris WORKER Passenger are cross-compatible with the 2019 model.
Mercedes-Benz Metris WORKER Passenger Bolt Pattern by Year
The table below shows how the Metris WORKER Passenger's wheel specifications have changed over the years. The 2019 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2019 Mercedes-Benz Metris WORKER Passenger
For your 2019 Mercedes-Benz Metris WORKER Passenger, the 5x112 bolt pattern is shared with 2017–2020 models. The 66.6mm center bore is critical; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset must stay within 30-50mm; deviations risk rubbing or poor handling. Always use 14x1.5 lug nuts with the correct seat type (cone or ball) to avoid wheel loosening. Verify that aftermarket wheels are load-rated for the Metris's weight. Professional installation and torque to spec are mandatory.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz Metris WORKER Passenger appears from 2017 to 2020 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for settling.
- ✅ Avoid using universal lug nuts; they may not seat properly on the Metris's specific wheel seat.
- ✅ Check that aftermarket wheels clear the brake calipers; the Metris has large brakes that can interfere with some designs.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Mercedes-Benz Metris WORKER Passenger — Frequently Asked Questions
What is the bolt pattern for a 2019 Mercedes-Benz Metris WORKER Passenger?
The 2019 Mercedes-Benz Metris WORKER Passenger uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 30-50mm.
What other years of Mercedes-Benz Metris WORKER Passenger have the same bolt pattern as the 2019?
The Mercedes-Benz Metris WORKER Passenger uses the 5x112 pattern from 2017 through 2020. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2019 Mercedes-Benz Metris WORKER Passenger?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2019 Mercedes-Benz?
The 2019 Metris WORKER Passenger uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2019 Mercedes-Benz Metris WORKER Passenger?
The factory center bore (hub bore) for the 2019 Mercedes-Benz Metris WORKER Passenger is 66.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the PCD for a 2019 Mercedes-Benz Metris WORKER Passenger?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2019 Metris WORKER Passenger, the PCD is 5x112.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset