2019 Mercedes-Benz GLC Coupe Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Mercedes-Benz GLC Coupe, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 30-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2019 GLC Coupe — Year-Specific Fitment Context
The 2019 Mercedes-Benz GLC Coupe is in year 3 of 8 using the 5x112 pattern (2017–2024). Wheels from any 2017–2024 Mercedes-Benz GLC Coupe are cross-compatible with the 2019 model.
Mercedes-Benz GLC Coupe Bolt Pattern by Year
The table below shows how the GLC Coupe's wheel specifications have changed over the years. The 2019 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2019 Mercedes-Benz GLC Coupe
For your 2019 Mercedes-Benz GLC Coupe, the 5x112 bolt pattern and 66.6mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The offset range is 30-50mm; staying within this range maintains suspension geometry and prevents rubbing. Always use lug nuts with the correct thread pitch (14x1.5) and seat type (ball seat for OEM, conical for most aftermarket). Mismatched seats can cause wheel loosening. Verify clearance with brake calipers and suspension components before final installation.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz GLC Coupe appears from 2017 to 2024 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; vibration and stress on hubs can result.
- ✅ Check inner clearance for aftermarket wheels with offsets near 30mm, as they may contact suspension components.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Mercedes-Benz GLC Coupe — Frequently Asked Questions
What is the bolt pattern for a 2019 Mercedes-Benz GLC Coupe?
The 2019 Mercedes-Benz GLC Coupe uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 30-50mm.
What other years of Mercedes-Benz GLC Coupe have the same bolt pattern as the 2019?
The Mercedes-Benz GLC Coupe uses the 5x112 pattern from 2017 through 2024. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2019 Mercedes-Benz GLC Coupe?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 2019 Mercedes-Benz GLC Coupe?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 30-50mm, and a center bore of at least 66.6mm (using hub rings if larger).
How do I measure the bolt pattern on my 2019 Mercedes-Benz?
The 2019 GLC Coupe uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What does 30-50mm offset mean for the 2019 GLC Coupe?
An offset of 30-50mm means the wheel's mounting surface is 30-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Mercedes-Benz.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset