2024 Mercedes-Benz Mercedes-AMG EQS Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Mercedes-Benz Mercedes-AMG EQS, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 30-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2024 Mercedes-AMG EQS — Year-Specific Fitment Context
The 2024 model year is the final year of the Mercedes-Benz Mercedes-AMG EQS's 5x112 bolt pattern run (since 2022). Wheels from any 2022–2024 Mercedes-Benz Mercedes-AMG EQS are cross-compatible with the 2024 model.
Mercedes-Benz Mercedes-AMG EQS Bolt Pattern by Year
The table below shows how the Mercedes-AMG EQS's wheel specifications have changed over the years. The 2024 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2022 | 5x112 | 66.6 | 30-50 |
| ▸ 2024 | 5x112 | 66.6 | 30-50 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2024 Mercedes-Benz Mercedes-AMG EQS
For your 2024 Mercedes-Benz Mercedes-AMG EQS, the critical fitment specs are a 5x112 bolt pattern, 66.6mm center bore, and offset range of 30-50mm. The 66.6mm bore is hub-centric, meaning aftermarket wheels must match exactly or use hub-centric rings to prevent vibration and ensure load is on the hub, not the lug nuts. Offset sensitivity is high: too low (e.g., 30mm) pushes wheels outward, risking fender rub; too high (e.g., 50mm) tucks them inward, possibly contacting suspension. Always use the correct 14x1.5 lug nuts with the proper seat type—Mercedes typically uses ball seat, but aftermarket wheels may require conical (60-degree) or ball seat. Mismatched seats can cause wheel loosening. Safety first: verify all specs before purchase.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz Mercedes-AMG EQS appears from 2022 to 2024 (2 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ If using aftermarket wheels, always install hub-centric rings (66.6mm ID to wheel's bore) to prevent vibrations.
- ✅ Avoid spacers unless necessary; if used, ensure they are hub-centric and do not reduce thread engagement below 8 full turns.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Mercedes-Benz Mercedes-AMG EQS — Frequently Asked Questions
What is the bolt pattern for a 2024 Mercedes-Benz Mercedes-AMG EQS?
The 2024 Mercedes-Benz Mercedes-AMG EQS uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 30-50mm.
What other years of Mercedes-Benz Mercedes-AMG EQS have the same bolt pattern as the 2024?
The Mercedes-Benz Mercedes-AMG EQS uses the 5x112 pattern from 2022 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2024 Mercedes-Benz Mercedes-AMG EQS?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Do 2024 Mercedes-Benz Mercedes-AMG EQSs use lug bolts or lug nuts?
The 2024 Mercedes-AMG EQS requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 2024 Mercedes-Benz?
The 2024 Mercedes-AMG EQS uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 2024 Mercedes-Benz Mercedes-AMG EQS?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 30-50mm, and a center bore of at least 66.6mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset