2010 Mercedes-Benz SLK-Class Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Mercedes-Benz SLK-Class, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 30-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2010 SLK-Class — Year-Specific Fitment Context
The 2010 Mercedes-Benz SLK-Class is in year 13 of 18 using the 5x112 pattern (1998–2015). Wheels from any 1998–2015 Mercedes-Benz SLK-Class are cross-compatible with the 2010 model.
Mercedes-Benz SLK-Class Bolt Pattern by Year
The table below shows how the SLK-Class's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1998 | 5x112 | 66.6 | 30-50 |
| 1999 | 5x112 | 66.6 | 30-50 |
| 2000 | 5x112 | 66.6 | 30-50 |
| 2001 | 5x112 | 66.6 | 30-50 |
| 2002 | 5x112 | 66.6 | 30-50 |
| 2003 | 5x112 | 66.6 | 30-50 |
| 2004 | 5x112 | 66.6 | 30-50 |
| 2005 | 5x112 | 66.6 | 30-50 |
| 2006 | 5x112 | 66.6 | 30-50 |
| 2007 | 5x112 | 66.6 | 30-50 |
| 2008 | 5x112 | 66.6 | 30-50 |
| 2009 | 5x112 | 66.6 | 30-50 |
| ▸ 2010 | 5x112 | 66.6 | 30-50 |
| 2011 | 5x112 | 66.6 | 30-50 |
| 2012 | 5x112 | 66.6 | 30-50 |
| 2013 | 5x112 | 66.6 | 30-50 |
| 2014 | 5x112 | 66.6 | 30-50 |
| 2015 | 5x112 | 66.6 | 30-50 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2010 Mercedes-Benz SLK-Class
For your 2010 Mercedes-Benz SLK-Class, the 5x112 bolt pattern is shared with 1998–2015 models, ensuring cross-compatibility. The 66.6mm center bore is critical: aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibrations and ensure proper load distribution. Offset must stay within 30-50mm; deviations risk rubbing or poor handling. Always use 14x1.5 lug nuts with the correct seat—Mercedes typically uses ball seats, but aftermarket wheels may require conical or shank-style nuts. Verify thread engagement and torque to 110-130 Nm. Re-torque after 50-100 miles. Avoid spacers unless hub-centric and properly installed.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz SLK-Class appears from 1998 to 2015 (18 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for wheel settling.
- ✅ Aftermarket wheels often have a larger center bore; use 66.6mm hub-centric rings to avoid vibrations.
- ✅ Verify lug nut seat type: Mercedes uses ball seats; aftermarket wheels may need conical or shank nuts.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Mercedes-Benz SLK-Class — Frequently Asked Questions
What is the bolt pattern for a 2010 Mercedes-Benz SLK-Class?
The 2010 Mercedes-Benz SLK-Class uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 30-50mm.
What other years of Mercedes-Benz SLK-Class have the same bolt pattern as the 2010?
The Mercedes-Benz SLK-Class uses the 5x112 pattern from 1998 through 2015. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2010 Mercedes-Benz SLK-Class?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What lug nut size does the 2010 Mercedes-Benz SLK-Class use?
The 2010 Mercedes-Benz SLK-Class uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the center bore of a 2010 Mercedes-Benz SLK-Class?
The factory center bore (hub bore) for the 2010 Mercedes-Benz SLK-Class is 66.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Will wheels from another Mercedes-Benz fit my 2010 SLK-Class?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.6mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset