2011 Mercedes-Benz SLK-Class Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Mercedes-Benz SLK-Class, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 30-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2011 SLK-Class — Year-Specific Fitment Context
The 2011 Mercedes-Benz SLK-Class is in year 14 of 18 using the 5x112 pattern (1998–2015). Wheels from any 1998–2015 Mercedes-Benz SLK-Class are cross-compatible with the 2011 model.
Mercedes-Benz SLK-Class Bolt Pattern by Year
The table below shows how the SLK-Class's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1998 | 5x112 | 66.6 | 30-50 |
| 1999 | 5x112 | 66.6 | 30-50 |
| 2000 | 5x112 | 66.6 | 30-50 |
| 2001 | 5x112 | 66.6 | 30-50 |
| 2002 | 5x112 | 66.6 | 30-50 |
| 2003 | 5x112 | 66.6 | 30-50 |
| 2004 | 5x112 | 66.6 | 30-50 |
| 2005 | 5x112 | 66.6 | 30-50 |
| 2006 | 5x112 | 66.6 | 30-50 |
| 2007 | 5x112 | 66.6 | 30-50 |
| 2008 | 5x112 | 66.6 | 30-50 |
| 2009 | 5x112 | 66.6 | 30-50 |
| 2010 | 5x112 | 66.6 | 30-50 |
| ▸ 2011 | 5x112 | 66.6 | 30-50 |
| 2012 | 5x112 | 66.6 | 30-50 |
| 2013 | 5x112 | 66.6 | 30-50 |
| 2014 | 5x112 | 66.6 | 30-50 |
| 2015 | 5x112 | 66.6 | 30-50 |
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2011 Mercedes-Benz SLK-Class
The 2011 Mercedes-Benz SLK-Class uses a 5x112 bolt pattern with a 66.6mm center bore. When selecting aftermarket wheels, ensure hub-centric rings are used to match the bore precisely, preventing vibrations and ensuring proper load distribution. The offset range is 30-50mm; staying within this range maintains suspension geometry and avoids rubbing. Always verify lug nut thread pitch (14x1.5) and seat type—Mercedes typically uses ball seats, but aftermarket wheels may require conical or shank-style nuts. Using incorrect lug nuts can lead to wheel loosening. For safety, re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Mercedes-Benz SLK-Class appears from 1998 to 2015 (18 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 110-130 Nm after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a center bore larger than 66.6mm without hub-centric rings; vibrations and stress on studs may occur.
- ✅ Check for brake caliper clearance, especially with aftermarket wheels; the SLK's brakes are tight, and offset changes can cause interference.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Mercedes-Benz SLK-Class — Frequently Asked Questions
What is the bolt pattern for a 2011 Mercedes-Benz SLK-Class?
The 2011 Mercedes-Benz SLK-Class uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 30-50mm.
What other years of Mercedes-Benz SLK-Class have the same bolt pattern as the 2011?
The Mercedes-Benz SLK-Class uses the 5x112 pattern from 1998 through 2015. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
What lug nut size does the 2011 Mercedes-Benz SLK-Class use?
The 2011 Mercedes-Benz SLK-Class uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Do 2011 Mercedes-Benz SLK-Classs use lug bolts or lug nuts?
The 2011 SLK-Class requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2011 Mercedes-Benz SLK-Class?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2011 SLK-Class, the PCD is 5x112.
What is the center bore of a 2011 Mercedes-Benz SLK-Class?
The factory center bore (hub bore) for the 2011 Mercedes-Benz SLK-Class is 66.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset