2024 MINI Hardtop Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2024 MINI Hardtop is 5x112. It has a center bore of 66.5 mm, an offset range of 45-54, and utilizes 14x1.25 (Ball seat, 17mm hex) fasteners tightened to 103 ft-lbs (140 Nm).
2024 MINI Hardtop Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Center Bore (Hub Bore) | 66.5 mm |
| Offset Range (ET) | 45-54 |
| Thread Size (Lug Nut / Bolt) | 14x1.25 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 17mm |
| Wheel Torque Specs | 103 ft-lbs (140 Nm) |
2024 Hardtop — Year-Specific Fitment Context
The 2024 MINI Hardtop is in year 11 of 13 using the 5x112 pattern (2014–2026). Wheels from any 2014–2026 MINI Hardtop are cross-compatible with the 2024 model. Across its full production run (2009–2026), the Hardtop has also used: 4x100.
MINI Hardtop Bolt Pattern by Year
Looking for all generations? View the complete MINI Hardtop (2009–2026) Bolt Pattern & Generation Guide →
The table below shows how the Hardtop's wheel specifications have changed over the years. The 2024 model year is highlighted.
2024 MINI Hardtop Wheel Interchange & Donor Fitment Guide (5x112)
The 5x112 bolt pattern is shared by 1795 vehicles in our database (very common). For safe wheel swaps on the 2024 MINI Hardtop, donor rims must match the 5x112 PCD and have a center bore of at least 66.5 mm:
DIRECT HUB MATCH Same 5x112 Pattern & Exact 66.5mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 BMW M5 | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
| 2019 BMW M6 | 66.6 mm (Exact) | 25-40 | 14x1.25 (Cone) |
| 2025 BMW M8 | 66.6 mm (Exact) | 20-30 | 14x1.25 (Cone) |
| 2025 BMW M850i | 66.6 mm (Exact) | 25-35 | 14x1.25 (Cone) |
| 2017 BMW X1 | 66.6 mm (Exact) | 48 | B 14x1.25 (Cone) |
| 2025 BMW X2 | 66.6 mm (Exact) | 35-45 | 14x1.25 (Cone) |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 103 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 MINI Hardtop — Frequently Asked Questions
What is the bolt pattern for a 2024 MINI Hardtop?
The 2024 MINI Hardtop uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.5mm and the offset is 45-54mm.
What other years of MINI Hardtop have the same bolt pattern as the 2024?
The MINI Hardtop uses the 5x112 pattern from 2014 through 2026. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
What is the PCD for a 2024 MINI Hardtop?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2024 Hardtop, the PCD is 5x112.
What is the factory wheel offset for a 2024 MINI Hardtop?
The OEM offset for the 2024 Hardtop is typically around 45-54mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 2024 MINI Hardtop?
Refer to your owner's manual for exact specs, but always tighten the 14x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2024 MINI?
The 2024 Hardtop uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →