2013 MINI Hardtop Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2013 MINI Hardtop, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | 14x1.25 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2013 Hardtop — Year-Specific Fitment Context
The 2013 model year is the final year of the MINI Hardtop's 4x100 bolt pattern run (since 2009). Wheels from any 2009–2013 MINI Hardtop are cross-compatible with the 2013 model. Important: starting in 2014, MINI switched to 5x112 — those wheels will not fit the 2013 model. Across its full production run (2009–2014), the Hardtop has also used: 5x112.
MINI Hardtop Bolt Pattern by Year
The table below shows how the Hardtop's wheel specifications have changed over the years. The 2013 model year is highlighted.
Fitment Notes
The 2013 MINI Hardtop has a bolt pattern of 4x100.
This means it is a 4 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, MINI Hardtop appears from 2009 to 2014 (6 model years).
Across model years, this model appears with 2 bolt patterns (4x100, 5x112).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 9.0 mm
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
2013 MINI Hardtop — Frequently Asked Questions
What is the bolt pattern for a 2013 MINI Hardtop?
The 2013 MINI Hardtop uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 45mm.
What other years of MINI Hardtop have the same bolt pattern as the 2013?
The MINI Hardtop uses the 4x100 pattern from 2009 through 2013. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
Will 2014 MINI Hardtop wheels fit a 2013 model?
No. The 2014 MINI Hardtop switched to a 5x112 bolt pattern, which is not compatible with the 2013 model's 4x100. Using mismatched patterns is unsafe.
What is the center bore of a 2013 MINI Hardtop?
The factory center bore (hub bore) for the 2013 MINI Hardtop is 56.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Do 2013 MINI Hardtops use lug bolts or lug nuts?
The 2013 Hardtop requires 14x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How tight should I torque the lug nuts on a 2013 MINI Hardtop?
Refer to your owner's manual for exact specs, but always tighten the 14x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Fitment Checklist Before You Buy Wheels
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Editorial Fitment Notes
MINI Hardtop has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.
- Observed production years in our database: 2009-2014 (6 model years).
- Observed bolt-pattern variants: 2 (4x100, 5x112).
- Observed total offset span across years: 9.0 mm.
- Observed center-bore variants: 2 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2013 MINI Hardtop, please report it via our About page contact so we can verify and update this record.