2026 Nissan Kicks Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Nissan Kicks is 5x114.3 (5x4.5"). It has a center bore of 66.1 mm, an offset range of 40-45, and utilizes 12x1.25 (Cone seat, 21mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2026 Nissan Kicks Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 66.1 mm |
| Offset Range (ET) | 40-45 |
| Thread Size (Lug Nut / Bolt) | 12x1.25 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2026 Kicks — Year-Specific Fitment Context
The 2026 model year is the final year of the Nissan Kicks's 5x114.3 bolt pattern run (since 2025). Wheels from any 2025–2026 Nissan Kicks are cross-compatible with the 2026 model. Across its full production run (2018–2026), the Kicks has also used: 4x100.
Nissan Kicks Bolt Pattern by Year
Looking for all generations? View the complete Nissan Kicks (2018–2026) Bolt Pattern & Generation Guide →
The table below shows how the Kicks's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Nissan Kicks Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 Nissan Kicks, donor rims must match the 5x114.3 PCD and have a center bore of at least 66.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 66.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2008 Hyundai Santa Fe | 66.1 mm (Exact) | 41 | N 12x1.50 (Cone) |
| 2016 Hyundai Tucson | 66.1 mm (Exact) | 51 | N 12x1.50 (Cone) |
| 2015 INFINITI Q40 | 66.1 mm (Exact) | 40 | N 12x1.25 (Cone) |
| 2024 INFINITI Q50 | 66.1 mm (Exact) | 40-50 | 12x1.25 (Cone) |
| 2022 INFINITI Q60 | 66.1 mm (Exact) | 40-50 | 12x1.25 (Cone) |
| 2019 INFINITI Q70 | 66.1 mm (Exact) | 40-50 | 12x1.25 (Cone) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2025 Genesis GV80 Coupe | 67.1 mm | 67.1mm → 66.1mm |
35-50 |
| 2013 Hyundai Accent | 67.1 mm | 67.1mm → 66.1mm |
35-50 |
| 2017 Hyundai Azera | 67.1 mm | 67.1mm → 66.1mm |
35-50 |
| 2008 Hyundai Elantra | 67.1 mm | 67.1mm → 66.1mm |
35-50 |
| 2020 Hyundai Elantra GT | 67.1 mm | 67.1mm → 66.1mm |
35-50 |
| 2025 Hyundai Elantra Hybrid | 67.1 mm | 67.1mm → 66.1mm |
35-50 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Nissan Kicks — Frequently Asked Questions
What is the bolt pattern for a 2026 Nissan Kicks?
The 2026 Nissan Kicks uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40-45mm.
What other years of Nissan Kicks have the same bolt pattern as the 2026?
The Nissan Kicks uses the 5x114.3 pattern from 2025 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2026 Nissan Kicks?
Refer to your owner's manual for exact specs, but always tighten the 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2026 Nissan?
The 2026 Kicks uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What lug nut size does the 2026 Nissan Kicks use?
The 2026 Nissan Kicks uses 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the center bore of a 2026 Nissan Kicks?
The factory center bore (hub bore) for the 2026 Nissan Kicks is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →