1996 Nissan King Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1996 Nissan King Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 100.0 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1996 King Cab — Year-Specific Fitment Context
The 1996 Nissan King Cab is in year 5 of 6 using the 6x139.7 pattern (1992–1997). Wheels from any 1992–1997 Nissan King Cab are cross-compatible with the 1996 model.
Nissan King Cab Bolt Pattern by Year
The table below shows how the King Cab's wheel specifications have changed over the years. The 1996 model year is highlighted.
Fitment Notes
The 1996 Nissan King Cab has a bolt pattern of 6x139.7.
Imperial Conversion: This bolt pattern is commonly referred to as 6x5.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 6x5.5".
This means it is a 6 lug pattern with a circle diameter of 139.7mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Nissan King Cab appears from 1992 to 1997 (6 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
1996 Nissan King Cab — Frequently Asked Questions
What is the bolt pattern for a 1996 Nissan King Cab?
The 1996 Nissan King Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 100.0mm and the offset is 40mm.
What other years of Nissan King Cab have the same bolt pattern as the 1996?
The Nissan King Cab uses the 6x139.7 pattern from 1992 through 1997. Wheels from any of these model years are dimensionally compatible with the 1996, provided the offset and center bore also match.
What is the PCD for a 1996 Nissan King Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1996 King Cab, the PCD is 6x139.7.
Will wheels from another Nissan fit my 1996 King Cab?
Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 100.0mm.
How do I measure the bolt pattern on my 1996 Nissan?
The 1996 King Cab uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 1996 Nissan King Cab?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 40mm, and a center bore of at least 100.0mm (using hub rings if larger).
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Nissan King Cab is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1992-1997 (6 model years).
- Observed bolt-pattern variants: 1 (6x139.7).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1996 Nissan King Cab, please report it via our About page contact so we can verify and update this record.