1997 Nissan King Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1997 Nissan King Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 100.0 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
1997 King Cab — Year-Specific Fitment Context
The 1997 model year is the final year of the Nissan King Cab's 6x139.7 bolt pattern run (since 1992). Wheels from any 1992–1997 Nissan King Cab are cross-compatible with the 1997 model.
Nissan King Cab Bolt Pattern by Year
The table below shows how the King Cab's wheel specifications have changed over the years. The 1997 model year is highlighted.
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 1997 Nissan King Cab
For your 1997 Nissan King Cab, the 6x139.7 bolt pattern is shared with 1992–1997 models. The 100.0mm center bore is critical; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibrations and ensure proper load transfer. Offset is sensitive: stock is 40mm; deviations affect scrub radius and clearance. Always use lug nuts with the correct thread pitch (12x1.25) and seat type (cone or ball seat, depending on the wheel). Mismatched lug nuts can cause wheel loss. Verify wheel clearance with suspension and brake components before installation.
Historical Fitment Data Reference
In our dataset, Nissan King Cab appears from 1992 to 1997 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ When using aftermarket wheels, verify that the center bore is at least 100.0mm; use hub-centric rings if larger.
- ✅ Check offset carefully: a lower offset (e.g., 30mm) may cause rubbing on the fender, while higher offset (e.g., 50mm) may contact suspension components.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1997 Nissan King Cab — Frequently Asked Questions
What is the bolt pattern for a 1997 Nissan King Cab?
The 1997 Nissan King Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 100.0mm and the offset is 40mm.
What other years of Nissan King Cab have the same bolt pattern as the 1997?
The Nissan King Cab uses the 6x139.7 pattern from 1992 through 1997. Wheels from any of these model years are dimensionally compatible with the 1997, provided the offset and center bore also match.
What is the PCD for a 1997 Nissan King Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1997 King Cab, the PCD is 6x139.7.
Why is matching the 100.0mm center bore important for the 1997 King Cab?
The 100.0mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How do I measure the bolt pattern on my 1997 Nissan?
The 1997 King Cab uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Will wheels from another Nissan fit my 1997 King Cab?
Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 100.0mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset