1994 Oldsmobile Cutlass Ciera Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1994 Oldsmobile Cutlass Ciera, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1994 Cutlass Ciera — Year-Specific Fitment Context
The 1994 Oldsmobile Cutlass Ciera is in year 3 of 4 using the 5x100 pattern (1992–1995). Wheels from any 1992–1995 Oldsmobile Cutlass Ciera are cross-compatible with the 1994 model.
Oldsmobile Cutlass Ciera Bolt Pattern by Year
The table below shows how the Cutlass Ciera's wheel specifications have changed over the years. The 1994 model year is highlighted.
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
Expert Buying Guide for 1994 Oldsmobile Cutlass Ciera
For your 1994 Oldsmobile Cutlass Ciera, the bolt pattern is 5x100 with a critical center bore of 57.1mm. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The offset is sensitive; stick to 45mm ±5mm to avoid rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (conical/60-degree). Never mix seat types—using the wrong lug nut can cause wheel loosening. Verify that aftermarket wheels are hub-centric or use rings, and torque to manufacturer specs.
Historical Fitment Data Reference
In our dataset, Oldsmobile Cutlass Ciera appears from 1992 to 1995 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for settling.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and stress on studs.
- ✅ Check that aftermarket wheels clear the brake calipers and suspension components, especially if lowering the car.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1994 Oldsmobile Cutlass Ciera — Frequently Asked Questions
What is the bolt pattern for a 1994 Oldsmobile Cutlass Ciera?
The 1994 Oldsmobile Cutlass Ciera uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 45mm.
What other years of Oldsmobile Cutlass Ciera have the same bolt pattern as the 1994?
The Oldsmobile Cutlass Ciera uses the 5x100 pattern from 1992 through 1995. Wheels from any of these model years are dimensionally compatible with the 1994, provided the offset and center bore also match.
What does 45mm offset mean for the 1994 Cutlass Ciera?
An offset of 45mm means the wheel's mounting surface is 45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Oldsmobile.
Can I use spacers on my 1994 Oldsmobile Cutlass Ciera?
Yes, but ensure the wheel spacers match the 5x100 bolt pattern and 57.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
How tight should I torque the lug nuts on a 1994 Oldsmobile Cutlass Ciera?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 1994 Oldsmobile?
The 1994 Cutlass Ciera uses a 5x100 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset