1992 Plymouth Acclaim Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1992 Plymouth Acclaim, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
1992 Acclaim — Year-Specific Fitment Context
The 1992 model year marks the beginning of the Plymouth Acclaim's 5x100 bolt pattern era, which continued through 1995 (4 consecutive years). Wheels from any 1992–1995 Plymouth Acclaim are cross-compatible with the 1992 model.
Plymouth Acclaim Bolt Pattern by Year
The table below shows how the Acclaim's wheel specifications have changed over the years. The 1992 model year is highlighted.
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
Expert Buying Guide for 1992 Plymouth Acclaim
For your 1992 Plymouth Acclaim, the bolt pattern is 5x100 with a 57.1mm center bore. Aftermarket wheels often have a larger bore, so hub-centric rings are essential to prevent vibration and ensure proper load distribution. The offset range is 35-45mm; staying within this range avoids rubbing or clearance issues. Always use lug nuts with the correct thread pitch (M12x1.5) and seat type (cone or ball seat) matching the wheel. Improper lug nuts can cause wheel loosening or damage. Verify fitment with a test fit before final installation.
Historical Fitment Data Reference
In our dataset, Plymouth Acclaim appears from 1992 to 1995 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Check for clearance between the wheel spokes and brake calipers, especially with aftermarket wheels.
- ✅ Use a torque wrench set to 80-90 ft-lbs; never exceed the manufacturer's specification.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1992 Plymouth Acclaim — Frequently Asked Questions
What is the bolt pattern for a 1992 Plymouth Acclaim?
The 1992 Plymouth Acclaim uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 35-45mmmm.
What other years of Plymouth Acclaim have the same bolt pattern as the 1992?
The Plymouth Acclaim uses the 5x100 pattern from 1992 through 1995. Wheels from any of these model years are dimensionally compatible with the 1992, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 1992 Plymouth Acclaim?
Refer to your owner's manual for exact specs, but always tighten the M12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 1992 Plymouth Acclaim?
The factory center bore (hub bore) for the 1992 Plymouth Acclaim is 57.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 1992 Plymouth Acclaim?
The OEM offset for the 1992 Acclaim is typically around 35-45mmmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Why is matching the 57.1mm center bore important for the 1992 Acclaim?
The 57.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset