1994 Plymouth Acclaim Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1994 Plymouth Acclaim, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
1994 Acclaim — Year-Specific Fitment Context
The 1994 Plymouth Acclaim is in year 3 of 4 using the 5x100 pattern (1992–1995). Wheels from any 1992–1995 Plymouth Acclaim are cross-compatible with the 1994 model.
Plymouth Acclaim Bolt Pattern by Year
The table below shows how the Acclaim's wheel specifications have changed over the years. The 1994 model year is highlighted.
Fitment Notes
The 1994 Plymouth Acclaim has a bolt pattern of 5x100.
This means it is a 5 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Plymouth Acclaim appears from 1992 to 1995 (4 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
1994 Plymouth Acclaim — Frequently Asked Questions
What is the bolt pattern for a 1994 Plymouth Acclaim?
The 1994 Plymouth Acclaim uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 35-45mmmm.
What other years of Plymouth Acclaim have the same bolt pattern as the 1994?
The Plymouth Acclaim uses the 5x100 pattern from 1992 through 1995. Wheels from any of these model years are dimensionally compatible with the 1994, provided the offset and center bore also match.
Can I use spacers on my 1994 Plymouth Acclaim?
Yes, but ensure the wheel spacers match the 5x100 bolt pattern and 57.1mm center bore. Also verify that you have enough thread engagement for your M12x1.5 hardware.
Can I put aftermarket wheels on my 1994 Plymouth Acclaim?
Absolutely. Just ensure the aftermarket wheels have a 5x100 bolt pattern, an offset near 35-45mmmm, and a center bore of at least 57.1mm (using hub rings if larger).
Do 1994 Plymouth Acclaims use lug bolts or lug nuts?
The 1994 Acclaim requires M12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What does 35-45mmmm offset mean for the 1994 Acclaim?
An offset of 35-45mmmm means the wheel's mounting surface is 35-45mmmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Plymouth.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Plymouth Acclaim is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1992-1995 (4 model years).
- Observed bolt-pattern variants: 1 (5x100).
- Observed total offset span across years: 80.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1994 Plymouth Acclaim, please report it via our About page contact so we can verify and update this record.