1995 Plymouth Acclaim Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1995 Plymouth Acclaim, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
1995 Acclaim — Year-Specific Fitment Context
The 1995 model year is the final year of the Plymouth Acclaim's 5x100 bolt pattern run (since 1992). Wheels from any 1992–1995 Plymouth Acclaim are cross-compatible with the 1995 model.
Plymouth Acclaim Bolt Pattern by Year
The table below shows how the Acclaim's wheel specifications have changed over the years. The 1995 model year is highlighted.
Fitment Notes
The 1995 Plymouth Acclaim has a bolt pattern of 5x100.
This means it is a 5 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Plymouth Acclaim appears from 1992 to 1995 (4 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
1995 Plymouth Acclaim — Frequently Asked Questions
What is the bolt pattern for a 1995 Plymouth Acclaim?
The 1995 Plymouth Acclaim uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 35-45mmmm.
What other years of Plymouth Acclaim have the same bolt pattern as the 1995?
The Plymouth Acclaim uses the 5x100 pattern from 1992 through 1995. Wheels from any of these model years are dimensionally compatible with the 1995, provided the offset and center bore also match.
What is the PCD for a 1995 Plymouth Acclaim?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1995 Acclaim, the PCD is 5x100.
Do 1995 Plymouth Acclaims use lug bolts or lug nuts?
The 1995 Acclaim requires M12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Why is matching the 57.1mm center bore important for the 1995 Acclaim?
The 57.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the center bore of a 1995 Plymouth Acclaim?
The factory center bore (hub bore) for the 1995 Plymouth Acclaim is 57.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Plymouth Acclaim is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1992-1995 (4 model years).
- Observed bolt-pattern variants: 1 (5x100).
- Observed total offset span across years: 80.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1995 Plymouth Acclaim, please report it via our About page contact so we can verify and update this record.