2017 Porsche 718 Boxster Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2017 Porsche 718 Boxster, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x130 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 57 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2017 718 Boxster — Year-Specific Fitment Context
The 2017 model year marks the beginning of the Porsche 718 Boxster's 5x130 bolt pattern era, which continued through 2024 (8 consecutive years). Wheels from any 2017–2024 Porsche 718 Boxster are cross-compatible with the 2017 model.
Porsche 718 Boxster Bolt Pattern by Year
The table below shows how the 718 Boxster's wheel specifications have changed over the years. The 2017 model year is highlighted.
5x130 Pattern Context
This bolt pattern appears on 208 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x130:
Expert Buying Guide for 2017 Porsche 718 Boxster
For the 2017 Porsche 718 Boxster, the 5x130 bolt pattern and 71.6mm center bore are critical. Aftermarket wheels must use hub-centric rings to avoid vibration and ensure proper load transfer. The factory offset is 57mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (14x1.50) and seat type—Porsche uses ball seats, not conical. Using incorrect lug nuts can lead to wheel loss. Stick to OEM or quality aftermarket wheels with proper hub bore and offset to maintain safety and performance.
Historical Fitment Data Reference
In our dataset, Porsche 718 Boxster appears from 2017 to 2024 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 7.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for settling.
- ✅ Avoid spacers unless using hub-centric designs; improper spacers can alter offset and stress bearings.
- ✅ Check inner clearance for brake calipers—some aftermarket wheels may require spacers or different offset.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2017 Porsche 718 Boxster — Frequently Asked Questions
What is the bolt pattern for a 2017 Porsche 718 Boxster?
The 2017 Porsche 718 Boxster uses a 5x130 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 57mm.
What other years of Porsche 718 Boxster have the same bolt pattern as the 2017?
The Porsche 718 Boxster uses the 5x130 pattern from 2017 through 2024. Wheels from any of these model years are dimensionally compatible with the 2017, provided the offset and center bore also match.
Can I use spacers on my 2017 Porsche 718 Boxster?
Yes, but ensure the wheel spacers match the 5x130 bolt pattern and 71.6mm center bore. Also verify that you have enough thread engagement for your B 14x1.50 hardware.
Do 2017 Porsche 718 Boxsters use lug bolts or lug nuts?
The 2017 718 Boxster requires B 14x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How tight should I torque the lug nuts on a 2017 Porsche 718 Boxster?
Refer to your owner's manual for exact specs, but always tighten the B 14x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Will wheels from another Porsche fit my 2017 718 Boxster?
Only if they share the exact same 5x130 bolt pattern, a compatible offset, and a center bore equal to or larger than 71.6mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset