2020 Porsche 718 Boxster Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Porsche 718 Boxster, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x130 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2020 718 Boxster — Year-Specific Fitment Context
The 2020 Porsche 718 Boxster is in year 4 of 8 using the 5x130 pattern (2017–2024). Wheels from any 2017–2024 Porsche 718 Boxster are cross-compatible with the 2020 model.
Porsche 718 Boxster Bolt Pattern by Year
The table below shows how the 718 Boxster's wheel specifications have changed over the years. The 2020 model year is highlighted.
5x130 Pattern Context
This bolt pattern appears on 208 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x130:
Expert Buying Guide for 2020 Porsche 718 Boxster
For your 2020 Porsche 718 Boxster, the 5x130 bolt pattern and 71.6mm center bore are critical. Aftermarket wheels must have a center bore of at least 71.6mm; use hub-centric rings to avoid vibrations. Offset should stay near 50mm; deviations affect handling and may require fender modifications. Always use lug nuts with 14x1.5 thread pitch and correct seat type: factory wheels use ball seat, aftermarket often use conical (60-degree). Verify lug nut seating to prevent loosening. Cross-compatible with 2017–2024 718 Boxster wheels.
Historical Fitment Data Reference
In our dataset, Porsche 718 Boxster appears from 2017 to 2024 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 7.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid spacers unless hub-centric and properly sized; they alter offset and load on bearings.
- ✅ Check inner clearance for brake calipers; some aftermarket wheels may require spacers or caliper grinding.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Porsche 718 Boxster — Frequently Asked Questions
What is the bolt pattern for a 2020 Porsche 718 Boxster?
The 2020 Porsche 718 Boxster uses a 5x130 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 50mm.
What other years of Porsche 718 Boxster have the same bolt pattern as the 2020?
The Porsche 718 Boxster uses the 5x130 pattern from 2017 through 2024. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
Will wheels from another Porsche fit my 2020 718 Boxster?
Only if they share the exact same 5x130 bolt pattern, a compatible offset, and a center bore equal to or larger than 71.6mm.
What is the PCD for a 2020 Porsche 718 Boxster?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2020 718 Boxster, the PCD is 5x130.
What is the center bore of a 2020 Porsche 718 Boxster?
The factory center bore (hub bore) for the 2020 Porsche 718 Boxster is 71.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I put aftermarket wheels on my 2020 Porsche 718 Boxster?
Absolutely. Just ensure the aftermarket wheels have a 5x130 bolt pattern, an offset near 50mm, and a center bore of at least 71.6mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset