2000 Porsche Boxster Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Porsche Boxster, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x130 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 53 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2000 Boxster — Year-Specific Fitment Context
The 2000 Porsche Boxster is in year 4 of 20 using the 5x130 pattern (1997–2016). Wheels from any 1997–2016 Porsche Boxster are cross-compatible with the 2000 model.
Porsche Boxster Bolt Pattern by Year
The table below shows how the Boxster's wheel specifications have changed over the years. The 2000 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1997 | 5x130 | 71.6 | 53 |
| 1998 | 5x130 | 71.6 | 53 |
| 1999 | 5x130 | 71.6 | 53 |
| ▸ 2000 | 5x130 | 71.6 | 53 |
| 2001 | 5x130 | 71.6 | 53 |
| 2002 | 5x130 | 71.6 | 53 |
| 2003 | 5x130 | 71.6 | 53 |
| 2004 | 5x130 | 71.6 | 53 |
| 2005 | 5x130 | 71.6 | 53 |
| 2006 | 5x130 | 71.6 | 55 |
| 2007 | 5x130 | 71.6 | 55 |
| 2008 | 5x130 | 71.6 | 55 |
| 2009 | 5x130 | 71.6 | 55 |
| 2010 | 5x130 | 71.6 | 55 |
| 2011 | 5x130 | 71.6 | 55 |
| 2012 | 5x130 | 71.6 | 55 |
| 2013 | 5x130 | 71.6 | 55 |
| 2014 | 5x130 | 71.6 | 57 |
| 2015 | 5x130 | 71.6 | 57 |
| 2016 | 5x130 | 71.6 | 57 |
5x130 Pattern Context
This bolt pattern appears on 208 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x130:
Expert Buying Guide for 2000 Porsche Boxster
For your 2000 Porsche Boxster, the 5x130 bolt pattern is shared with all Boxsters from 1997–2016. The critical center bore is 71.6mm; aftermarket wheels with a larger bore require hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive: stock is 53mm, but ranges from 45–60mm are common. Going too low (e.g., 40mm) may cause fender rubbing, while too high (65mm) risks inner clearance issues. Always use lug nuts with the correct thread pitch (14x1.50) and seat type—Porsche uses ball seats, not conical. Mismatched seats can lead to wheel loosening. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Porsche Boxster appears from 1997 to 2016 (20 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 4.0 mm
Quick Tips & Safety Warnings
- ✅ Always re-torque lug nuts to 96 ft-lb after 50 miles of driving.
- ✅ When using aftermarket wheels, verify that the center bore is at least 71.6mm and use hub-centric rings if larger.
- ✅ Check for brake caliper clearance, especially with aftermarket wheels; the Boxster's front calipers are large.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 Porsche Boxster — Frequently Asked Questions
What is the bolt pattern for a 2000 Porsche Boxster?
The 2000 Porsche Boxster uses a 5x130 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 53mm.
What other years of Porsche Boxster have the same bolt pattern as the 2000?
The Porsche Boxster uses the 5x130 pattern from 1997 through 2016. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
Why is matching the 71.6mm center bore important for the 2000 Boxster?
The 71.6mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I use spacers on my 2000 Porsche Boxster?
Yes, but ensure the wheel spacers match the 5x130 bolt pattern and 71.6mm center bore. Also verify that you have enough thread engagement for your B 14x1.50 hardware.
How do I measure the bolt pattern on my 2000 Porsche?
The 2000 Boxster uses a 5x130 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2000 Porsche Boxster?
The factory center bore (hub bore) for the 2000 Porsche Boxster is 71.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset