2006 Porsche Boxster Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 Porsche Boxster, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x130 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 55 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2006 Boxster — Year-Specific Fitment Context
The 2006 Porsche Boxster is in year 10 of 20 using the 5x130 pattern (1997–2016). Wheels from any 1997–2016 Porsche Boxster are cross-compatible with the 2006 model.
Porsche Boxster Bolt Pattern by Year
The table below shows how the Boxster's wheel specifications have changed over the years. The 2006 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1997 | 5x130 | 71.6 | 53 |
| 1998 | 5x130 | 71.6 | 53 |
| 1999 | 5x130 | 71.6 | 53 |
| 2000 | 5x130 | 71.6 | 53 |
| 2001 | 5x130 | 71.6 | 53 |
| 2002 | 5x130 | 71.6 | 53 |
| 2003 | 5x130 | 71.6 | 53 |
| 2004 | 5x130 | 71.6 | 53 |
| 2005 | 5x130 | 71.6 | 53 |
| ▸ 2006 | 5x130 | 71.6 | 55 |
| 2007 | 5x130 | 71.6 | 55 |
| 2008 | 5x130 | 71.6 | 55 |
| 2009 | 5x130 | 71.6 | 55 |
| 2010 | 5x130 | 71.6 | 55 |
| 2011 | 5x130 | 71.6 | 55 |
| 2012 | 5x130 | 71.6 | 55 |
| 2013 | 5x130 | 71.6 | 55 |
| 2014 | 5x130 | 71.6 | 57 |
| 2015 | 5x130 | 71.6 | 57 |
| 2016 | 5x130 | 71.6 | 57 |
5x130 Pattern Context
This bolt pattern appears on 208 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x130:
Expert Buying Guide for 2006 Porsche Boxster
For your 2006 Porsche Boxster, the 5x130 bolt pattern is shared with all Boxster models from 1997–2016, but fitment requires attention to three critical specs. The center bore is 71.6mm; aftermarket wheels often have a larger bore, so hub-centric rings are mandatory to prevent vibration and ensure proper load transfer. Offset is sensitive—stock is 55mm, and deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut compatibility: the thread pitch is 14x1.50, and the seat type must match (factory uses ball seat; aftermarket wheels may require conical or ball seat lug nuts). Using incorrect lug nuts can lead to wheel loosening. For safety, re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Porsche Boxster appears from 1997 to 2016 (20 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 4.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 96 lb-ft after 50 miles of driving to account for settling.
- ✅ Avoid using hub-centric rings made of plastic; aluminum rings are more durable and heat-resistant.
- ✅ When installing aftermarket wheels, check inner clearance against the strut and outer clearance against the fender, especially with lowered suspension.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2006 Porsche Boxster — Frequently Asked Questions
What is the bolt pattern for a 2006 Porsche Boxster?
The 2006 Porsche Boxster uses a 5x130 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 55mm.
What other years of Porsche Boxster have the same bolt pattern as the 2006?
The Porsche Boxster uses the 5x130 pattern from 1997 through 2016. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2006 Porsche Boxster?
Refer to your owner's manual for exact specs, but always tighten the B 14x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the factory wheel offset for a 2006 Porsche Boxster?
The OEM offset for the 2006 Boxster is typically around 55mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 55mm offset mean for the 2006 Boxster?
An offset of 55mm means the wheel's mounting surface is 55mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Porsche.
What lug nut size does the 2006 Porsche Boxster use?
The 2006 Porsche Boxster uses B 14x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset