2014 Ram 1500 Regular Cab Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2014 Ram 1500 Regular Cab is 5x139.7 (5x5.5"). It has a center bore of 77.8 mm, an offset range of 19, and utilizes 9/16 (Cone seat, 22mm hex) fasteners tightened to 140 ft-lbs (190 Nm).
2014 Ram 1500 Regular Cab Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x139.7 (5x5.5") |
|---|---|
| Center Bore (Hub Bore) | 77.8 mm |
| Offset Range (ET) | 19 |
| Thread Size (Lug Nut / Bolt) | 9/16 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 22mm |
| Wheel Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 5x139.7 is commonly referred to as 5x5.5" in US Standard.
2014 1500 Regular Cab — Year-Specific Fitment Context
The 2014 Ram 1500 Regular Cab is in year 4 of 8 using the 5x139.7 pattern (2011–2018). Wheels from any 2011–2018 Ram 1500 Regular Cab are cross-compatible with the 2014 model.
Ram 1500 Regular Cab Bolt Pattern by Year
The table below shows how the 1500 Regular Cab's wheel specifications have changed over the years. The 2014 model year is highlighted.
2014 Ram 1500 Regular Cab Wheel Interchange & Donor Fitment Guide (5x139.7)
The 5x139.7 bolt pattern is shared by 341 vehicles in our database (moderately common). For safe wheel swaps on the 2014 Ram 1500 Regular Cab, donor rims must match the 5x139.7 PCD and have a center bore of at least 77.8 mm:
DIRECT HUB MATCH Same 5x139.7 Pattern & Exact 77.8mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2008 Dodge Ram 1500 Mega Cab | 77.8 mm (Exact) | 19 | 9/16 (Cone) |
| 1998 Dodge Ram 1500 Quad Cab | 77.8 mm (Exact) | 19 | 9/16 (Cone) |
| 1994 Dodge Ram 1500 Regular Cab | 77.8 mm (Exact) | 19 | 9/16 (Cone) |
| 1995 Dodge Ram Van 1500 | 77.8 mm (Exact) | 10 | N 1/2"-RH (Cone) |
| 1992 Dodge Ram Van B150 | 77.8 mm (Exact) | 10 | N 1/2"-RH (Cone) |
| 1992 Dodge Ram Van B250 | 77.8 mm (Exact) | 10 | N 1/2"-RH (Cone) |
HUB RING FITMENT Same 5x139.7 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 1992 Dodge Ram Wagon B150 | 108.0 mm | 108.0mm → 77.8mm |
0-15mm |
| 1992 Dodge Ram Wagon B250 | 108.0 mm | 108.0mm → 77.8mm |
0-15mm |
| 1992 Dodge Ramcharger | 108.0 mm | 108.0mm → 77.8mm |
0-15mm |
| 1992 Ford Bronco | 108.0 mm | 108.0mm → 77.8mm |
0 |
| 1992 Ford Club Wagon | 87.1 mm | 87.1mm → 77.8mm |
0-15mm |
| 2003 Ford E150 Passenger | 87.1 mm | 87.1mm → 77.8mm |
10-25mm |
Expert Buying Guide for 2014 Ram 1500 Regular Cab
For your 2014 Ram 1500 Regular Cab, the 5x139.7 bolt pattern is shared across 2011–2018 models, ensuring cross-compatibility. However, the 77.8mm center bore is critical: aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive; the factory 19mm offset maintains optimal suspension geometry and tire clearance. Deviating more than ±10mm may cause rubbing or bearing stress. Always use the correct 9/16" lug nuts with a cone seat (60-degree taper) to match factory wheel seats. Flat or ball-seat nuts can loosen, leading to wheel detachment. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Ram 1500 Regular Cab appears from 2011 to 2018 (8 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 130-140 ft-lbs after 50 miles of driving, then check periodically.
- ✅ Avoid using universal lug nuts; they may not seat properly on Ram's cone-seat wheels.
- ✅ When installing aftermarket wheels, verify hub-centric ring inner diameter matches 77.8mm exactly.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
2014 Ram 1500 Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 2014 Ram 1500 Regular Cab?
The 2014 Ram 1500 Regular Cab uses a 5x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 77.8mm and the offset is 19mm.
What other years of Ram 1500 Regular Cab have the same bolt pattern as the 2014?
The Ram 1500 Regular Cab uses the 5x139.7 pattern from 2011 through 2018. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
What is the center bore of a 2014 Ram 1500 Regular Cab?
The factory center bore (hub bore) for the 2014 Ram 1500 Regular Cab is 77.8mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Why is matching the 77.8mm center bore important for the 2014 1500 Regular Cab?
The 77.8mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Will wheels from another Ram fit my 2014 1500 Regular Cab?
Only if they share the exact same 5x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 77.8mm.
Can I use spacers on my 2014 Ram 1500 Regular Cab?
Yes, but ensure the wheel spacers match the 5x139.7 bolt pattern and 77.8mm center bore. Also verify that you have enough thread engagement for your 9/16 hardware.
Need Full Fitment Data in Bulk?
Stop scraping or looking up cars one by one. Import 12,400+ verified vehicle specs (1992–2025) directly into your Shopify store, inventory system, or custom automotive software.
Explore Master Database (CSV) →