2025 Ram 1500 REV Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2025 Ram 1500 REV, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 77.8 mm |
| Offset (ET) | 19 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2025 1500 REV — Year-Specific Fitment Context
The 2025 is the only model year of the Ram 1500 REV in our database using the 6x139.7 bolt pattern.
Fitment Notes
The 2025 Ram 1500 REV has a bolt pattern of 6x139.7.
Imperial Conversion: This bolt pattern is commonly referred to as 6x5.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 6x5.5".
This means it is a 6 lug pattern with a circle diameter of 139.7mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Ram 1500 REV appears from 2025 to 2025 (1 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
2025 Ram 1500 REV — Frequently Asked Questions
What is the bolt pattern for a 2025 Ram 1500 REV?
The 2025 Ram 1500 REV uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 77.8mm and the offset is 19mm.
What does 19mm offset mean for the 2025 1500 REV?
An offset of 19mm means the wheel's mounting surface is 19mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ram.
What is the center bore of a 2025 Ram 1500 REV?
The factory center bore (hub bore) for the 2025 Ram 1500 REV is 77.8mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 2025 Ram 1500 REV?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2025 Ram?
The 2025 1500 REV uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 2025 Ram 1500 REV?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 19mm, and a center bore of at least 77.8mm (using hub rings if larger).
Fitment Checklist Before You Buy Wheels
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Ram 1500 REV is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2025-2025 (1 model years).
- Observed bolt-pattern variants: 1 (6x139.7).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2025 Ram 1500 REV, please report it via our About page contact so we can verify and update this record.