2019 Nissan TITAN XD King Cab Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Nissan TITAN XD King Cab, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 6x139.7 (6x5.5")
Lug Nut / Bolt Size 12x1.25
Center Bore (CB) 77.8 mm
Offset (ET) 25
Torque Specs 80 ft-lbs (108 Nm)

2019 TITAN XD King Cab — Year-Specific Fitment Context

The 2019 is the only model year of the Nissan TITAN XD King Cab in our database using the 6x139.7 bolt pattern. Note: the 2018 model used a different pattern (6x114.3), so its wheels are NOT interchangeable with the 2019. Across its full production run (2017–2019), the TITAN XD King Cab has also used: 6x114.3.

Nissan TITAN XD King Cab Bolt Pattern by Year

The table below shows how the TITAN XD King Cab's wheel specifications have changed over the years. The 2019 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2017 6x114.3 66.1 45
2018 6x114.3 66.1 45
▸ 2019 6x139.7 77.8 25

Fitment Notes

The 2019 Nissan TITAN XD King Cab has a bolt pattern of 6x139.7.

Imperial Conversion: This bolt pattern is commonly referred to as 6x5.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 6x5.5".

This means it is a 6 lug pattern with a circle diameter of 139.7mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Nissan TITAN XD King Cab appears from 2017 to 2019 (3 model years).

Across model years, this model appears with 2 bolt patterns (6x114.3, 6x139.7).

6x139.7 Pattern Context

This bolt pattern appears on 1067 vehicles in our current database and is considered common.

Examples of other vehicles using 6x139.7:

2019 Nissan TITAN XD King Cab — Frequently Asked Questions

What is the bolt pattern for a 2019 Nissan TITAN XD King Cab?

The 2019 Nissan TITAN XD King Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 77.8mm and the offset is 25mm.

Can I use 2018 Nissan TITAN XD King Cab wheels on a 2019?

No. The 2018 TITAN XD King Cab used a 6x114.3 bolt pattern, which differs from the 2019's 6x139.7. They are not interchangeable.

What is the factory wheel offset for a 2019 Nissan TITAN XD King Cab?

The OEM offset for the 2019 TITAN XD King Cab is typically around 25mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

What does 25mm offset mean for the 2019 TITAN XD King Cab?

An offset of 25mm means the wheel's mounting surface is 25mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Nissan.

Will wheels from another Nissan fit my 2019 TITAN XD King Cab?

Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 77.8mm.

What lug nut size does the 2019 Nissan TITAN XD King Cab use?

The 2019 Nissan TITAN XD King Cab uses 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Nissan TITAN XD King Cab has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 2019 Nissan TITAN XD King Cab, please report it via our About page contact so we can verify and update this record.

Nissan TITAN XD King Cab By Year

2017 2018 2019

Other Nissan Models

200SX 240SX Altima Ariya Armada Frontier Crew Cab GT-R Kicks Murano NV1500 Cargo NV200 NV200 Taxi NV2500 HD Cargo NV3500 HD Cargo Rogue Rogue Sport Stanza TITAN XD King Cab Titan King Cab cube