2024 Ram 1500 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2024 Ram 1500 is 5x139.7 (5x5.5"). It has a center bore of 77.8 mm, an offset range of 18-25, and utilizes 14x1.5 (Cone seat, 22mm hex) fasteners tightened to 130 ft-lbs (176 Nm).
2024 Ram 1500 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x139.7 (5x5.5") |
|---|---|
| Center Bore (Hub Bore) | 77.8 mm |
| Offset Range (ET) | 18-25 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 22mm |
| Wheel Torque Specs | 130 ft-lbs (176 Nm) |
Imperial Match: 5x139.7 is commonly referred to as 5x5.5" in US Standard.
2024 1500 — Year-Specific Fitment Context
The 2024 model year marks the beginning of the Ram 1500's 5x139.7 bolt pattern era, which continued through 2026 (3 consecutive years). Wheels from any 2024–2026 Ram 1500 are cross-compatible with the 2024 model.
Ram 1500 Bolt Pattern by Year
Looking for all generations? View the complete Ram 1500 (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the 1500's wheel specifications have changed over the years. The 2024 model year is highlighted.
2024 Ram 1500 Wheel Interchange & Donor Fitment Guide (5x139.7)
The 5x139.7 bolt pattern is shared by 332 vehicles in our database (moderately common). For safe wheel swaps on the 2024 Ram 1500, donor rims must match the 5x139.7 PCD and have a center bore of at least 77.8 mm:
DIRECT HUB MATCH Same 5x139.7 Pattern & Exact 77.8mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Rivian RCV | 77.8 mm (Exact) | Not Applicable | 14x1.5 (Cone) |
| 2005 Dodge Dakota Club Cab | 77.8 mm (Exact) | 25.4 | 9/16 (Cone) |
| 2005 Dodge Dakota Quad Cab | 77.8 mm (Exact) | 25.4 | 9/16 (Cone) |
| 2018 Ram 1500 Regular Cab | 77.8 mm (Exact) | 19 | 9/16 (Cone) |
| 2025 Rivian EDV | 77.8 mm (Exact) | Not Applicable | 14x1.5 (Flat) |
| 1992 Dodge Ram Van B150 | 77.8 mm (Exact) | 10 | N 1/2"-RH (Cone) |
HUB RING FITMENT Same 5x139.7 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2025 Suzuki Jimny | 108 mm | 108mm → 77.8mm |
22 |
| 2025 Suzuki Jimny Sierra | 108 mm | 108mm → 77.8mm |
5 |
| 2005 Dodge Durango | 78.1 mm | 78.1mm → 77.8mm |
35 |
| 1992 Dodge Ram Wagon B150 | 108.0 mm | 108.0mm → 77.8mm |
0-15mm |
| 1992 Dodge Ram Wagon B250 | 108.0 mm | 108.0mm → 77.8mm |
0-15mm |
| 1992 Dodge Ramcharger | 108.0 mm | 108.0mm → 77.8mm |
0-15mm |
Quick Tips & Safety Warnings
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 130 ft-lbs (176 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Ram 1500 — Frequently Asked Questions
What is the bolt pattern for a 2024 Ram 1500?
The 2024 Ram 1500 uses a 5x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 77.8mm and the offset is 18-25mm.
What other years of Ram 1500 have the same bolt pattern as the 2024?
The Ram 1500 uses the 5x139.7 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2024 Ram 1500?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the factory wheel offset for a 2024 Ram 1500?
The OEM offset for the 2024 1500 is typically around 18-25mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 2024 Ram 1500?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2024 1500, the PCD is 5x139.7.
What does 18-25mm offset mean for the 2024 1500?
An offset of 18-25mm means the wheel's mounting surface is 18-25mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ram.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →