2014 Ram 2500 Crew Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 Ram 2500 Crew Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 121.3 mm |
| Offset (ET) | 43 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
2014 2500 Crew Cab — Year-Specific Fitment Context
The 2014 Ram 2500 Crew Cab is in year 4 of 14 using the 8x165.1 pattern (2011–2024). Wheels from any 2011–2024 Ram 2500 Crew Cab are cross-compatible with the 2014 model.
Ram 2500 Crew Cab Bolt Pattern by Year
The table below shows how the 2500 Crew Cab's wheel specifications have changed over the years. The 2014 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2011 | 8x165.1 | 121.3 | 25 |
| 2012 | 8x165.1 | 121.3 | 43 |
| 2013 | 8x165.1 | 121.3 | 43 |
| ▸ 2014 | 8x165.1 | 121.3 | 43 |
| 2015 | 8x165.1 | 121.3 | 43 |
| 2016 | 8x165.1 | 121.3 | 43 |
| 2017 | 8x165.1 | 121.3 | 43 |
| 2018 | 8x165.1 | 121.3 | 43 |
| 2019 | 8x165.1 | 121.3 | 43 |
| 2020 | 8x165.1 | 121.3 | 43 |
| 2021 | 8x165.1 | 121.3 | 43 |
| 2022 | 8x165.1 | 121.3 | 43 |
| 2024 | 8x165.1 | 121.3 | 43 |
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 2014 Ram 2500 Crew Cab
For the 2014 Ram 2500 Crew Cab, the 8x165.1 bolt pattern and 121.3mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 124mm), requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. Offset should stay near 43mm; deviations beyond ±10mm risk rubbing or suspension interference. Always use 14x1.5 lug nuts with the correct seat (cone or ball) matching the wheel. Improper seating can cause loosening. Re-torque after 50-100 miles. Wheels from 2011-2024 Ram 2500 Crew Cab models are direct fit.
Historical Fitment Data Reference
In our dataset, Ram 2500 Crew Cab appears from 2011 to 2024 (13 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 18.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a larger center bore than 121.3mm to avoid vibrations.
- ✅ Stick to offset within 43mm ±10mm; lower offset pushes wheels outward, risking fender rub on heavy loads.
- ✅ Re-torque lug nuts to 140 ft-lbs after 50-100 miles; use a torque wrench to prevent over-tightening or loosening.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2014 Ram 2500 Crew Cab — Frequently Asked Questions
What is the bolt pattern for a 2014 Ram 2500 Crew Cab?
The 2014 Ram 2500 Crew Cab uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 121.3mm and the offset is 43mm.
What other years of Ram 2500 Crew Cab have the same bolt pattern as the 2014?
The Ram 2500 Crew Cab uses the 8x165.1 pattern from 2011 through 2024. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
Why is matching the 121.3mm center bore important for the 2014 2500 Crew Cab?
The 121.3mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What does 43mm offset mean for the 2014 2500 Crew Cab?
An offset of 43mm means the wheel's mounting surface is 43mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ram.
What lug nut size does the 2014 Ram 2500 Crew Cab use?
The 2014 Ram 2500 Crew Cab uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the center bore of a 2014 Ram 2500 Crew Cab?
The factory center bore (hub bore) for the 2014 Ram 2500 Crew Cab is 121.3mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset