2014 Ram 2500 Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 Ram 2500 Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 121.3 mm |
| Offset (ET) | 43 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
2014 2500 Regular Cab — Year-Specific Fitment Context
The 2014 Ram 2500 Regular Cab is in year 4 of 14 using the 8x165.1 pattern (2011–2024). Wheels from any 2011–2024 Ram 2500 Regular Cab are cross-compatible with the 2014 model.
Ram 2500 Regular Cab Bolt Pattern by Year
The table below shows how the 2500 Regular Cab's wheel specifications have changed over the years. The 2014 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2011 | 8x165.1 | 121.3 | 25 |
| 2012 | 8x165.1 | 121.3 | 43 |
| 2013 | 8x165.1 | 121.3 | 43 |
| ▸ 2014 | 8x165.1 | 121.3 | 43 |
| 2015 | 8x165.1 | 121.3 | 43 |
| 2016 | 8x165.1 | 121.3 | 43 |
| 2017 | 8x165.1 | 121.3 | 43 |
| 2018 | 8x165.1 | 121.3 | 43 |
| 2019 | 8x165.1 | 121.3 | 43 |
| 2021 | 8x165.1 | 121.3 | 43 |
| 2022 | 8x165.1 | 121.3 | 43 |
| 2024 | 8x165.1 | 121.3 | 43 |
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 2014 Ram 2500 Regular Cab
For your 2014 Ram 2500 Regular Cab, the 8x165.1 bolt pattern and 121.3mm center bore are critical. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 43mm; deviations beyond ±10mm may cause rubbing or clearance issues. Use only 14x1.5 lug nuts with the correct seat type (factory uses cone seat). Mixing thread pitches or seat types can lead to wheel loss. Always verify wheel load rating exceeds your vehicle's GVWR.
Historical Fitment Data Reference
In our dataset, Ram 2500 Regular Cab appears from 2011 to 2024 (12 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 18.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid wheels with offset below 33mm (too aggressive) or above 53mm (too tucked) without verifying clearance.
- ✅ Check that aftermarket wheels have a minimum load rating of 3,200 lbs each for safety.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2014 Ram 2500 Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 2014 Ram 2500 Regular Cab?
The 2014 Ram 2500 Regular Cab uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 121.3mm and the offset is 43mm.
What other years of Ram 2500 Regular Cab have the same bolt pattern as the 2014?
The Ram 2500 Regular Cab uses the 8x165.1 pattern from 2011 through 2024. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
Why is matching the 121.3mm center bore important for the 2014 2500 Regular Cab?
The 121.3mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Do 2014 Ram 2500 Regular Cabs use lug bolts or lug nuts?
The 2014 2500 Regular Cab requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the center bore of a 2014 Ram 2500 Regular Cab?
The factory center bore (hub bore) for the 2014 Ram 2500 Regular Cab is 121.3mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I use spacers on my 2014 Ram 2500 Regular Cab?
Yes, but ensure the wheel spacers match the 8x165.1 bolt pattern and 121.3mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset