2026 Ram 4500 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Ram 4500 is 8x165.1 (8x6.5"). It has a center bore of 121.3 mm, an offset range of Not Applicable, and utilizes 14x1.5 (Flat seat, 22mm hex) fasteners tightened to 140 ft-lbs (190 Nm).
2026 Ram 4500 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Center Bore (Hub Bore) | 121.3 mm |
| Offset Range (ET) | Not Applicable |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 22mm |
| Wheel Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
2026 4500 — Year-Specific Fitment Context
The 2026 model year is the final year of the Ram 4500's 8x165.1 bolt pattern run (since 2024). Wheels from any 2024–2026 Ram 4500 are cross-compatible with the 2026 model.
Ram 4500 Bolt Pattern by Year
Looking for all generations? View the complete Ram 4500 (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the 4500's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Ram 4500 Wheel Interchange & Donor Fitment Guide (8x165.1)
The 8x165.1 bolt pattern is shared by 867 vehicles in our database (common). For safe wheel swaps on the 2026 Ram 4500, donor rims must match the 8x165.1 PCD and have a center bore of at least 121.3 mm:
DIRECT HUB MATCH Same 8x165.1 Pattern & Exact 121.3mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 1996 Dodge Ram 2500 Regular Cab | 121.3 mm (Exact) | 43 | 9/16 (Cone) |
| 2025 Ram 2500 | 121.3 mm (Exact) | 45-55 | 14x1.5 (Flat) |
| 2024 Ram 2500 Crew Cab | 121.3 mm (Exact) | 43 | 14x1.5 (Cone) |
| 2024 Ram 2500 Mega Cab | 121.3 mm (Exact) | 43 | 14x1.5 (Cone) |
| 2024 Ram 2500 Regular Cab | 121.3 mm (Exact) | 43 | 14x1.5 (Cone) |
| 2025 Ram 3500 | 121.3 mm (Exact) | 45-55 | 14x1.5 (Flat) |
HUB RING FITMENT Same 8x165.1 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2025 Ford E-350 | 124.9 mm | 124.9mm → 121.3mm |
0 to 12 mm (varies by year and wheel size; commonly 0 mm for 16x7 dually, 12 mm for 16x6 single rear wheel) |
| 2011 Ford E150 Passenger | 124.9 mm | 124.9mm → 121.3mm |
0-15mm |
| 2025 GMC HUMMER EV Pickup | 124.9 mm | 124.9mm → 121.3mm |
25-35 |
| 2021 Nissan NV1500 Cargo | 131.0 mm | 131.0mm → 121.3mm |
30 |
| 2021 Nissan NV2500 HD Cargo | 131.0 mm | 131.0mm → 121.3mm |
30 |
| 2021 Nissan NV3500 HD Cargo | 131.0 mm | 131.0mm → 121.3mm |
30 |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Ram 4500 — Frequently Asked Questions
What is the bolt pattern for a 2026 Ram 4500?
The 2026 Ram 4500 uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 121.3mm and the offset is Not Applicablemm.
What other years of Ram 4500 have the same bolt pattern as the 2026?
The Ram 4500 uses the 8x165.1 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2026 Ram?
The 2026 4500 uses a 8x165.1 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 2026 Ram 4500?
Absolutely. Just ensure the aftermarket wheels have a 8x165.1 bolt pattern, an offset near Not Applicablemm, and a center bore of at least 121.3mm (using hub rings if larger).
What is the factory wheel offset for a 2026 Ram 4500?
The OEM offset for the 2026 4500 is typically around Not Applicablemm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2026 Ram 4500?
The factory center bore (hub bore) for the 2026 Ram 4500 is 121.3mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →