2013 Ram C/V Tradesman Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2013 Ram C/V Tradesman, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x127 (5x5") |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 71.5 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
2013 C/V Tradesman — Year-Specific Fitment Context
The 2013 model year marks the beginning of the Ram C/V Tradesman's 5x127 bolt pattern era, which continued through 2015 (3 consecutive years). Wheels from any 2013–2015 Ram C/V Tradesman are cross-compatible with the 2013 model.
Ram C/V Tradesman Bolt Pattern by Year
The table below shows how the C/V Tradesman's wheel specifications have changed over the years. The 2013 model year is highlighted.
Fitment Notes
The 2013 Ram C/V Tradesman has a bolt pattern of 5x127.
Imperial Conversion: This bolt pattern is commonly referred to as 5x5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x5".
This means it is a 5 lug pattern with a circle diameter of 127mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Ram C/V Tradesman appears from 2013 to 2015 (3 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
5x127 Pattern Context
This bolt pattern appears on 236 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x127:
2013 Ram C/V Tradesman — Frequently Asked Questions
What is the bolt pattern for a 2013 Ram C/V Tradesman?
The 2013 Ram C/V Tradesman uses a 5x127 bolt pattern (also called lug pattern or PCD). The center bore is 71.5mm and the offset is 35-45mmmm.
What other years of Ram C/V Tradesman have the same bolt pattern as the 2013?
The Ram C/V Tradesman uses the 5x127 pattern from 2013 through 2015. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
Can I use spacers on my 2013 Ram C/V Tradesman?
Yes, but ensure the wheel spacers match the 5x127 bolt pattern and 71.5mm center bore. Also verify that you have enough thread engagement for your M12x1.5 hardware.
Why is matching the 71.5mm center bore important for the 2013 C/V Tradesman?
The 71.5mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What lug nut size does the 2013 Ram C/V Tradesman use?
The 2013 Ram C/V Tradesman uses M12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How do I measure the bolt pattern on my 2013 Ram?
The 2013 C/V Tradesman uses a 5x127 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Ram C/V Tradesman is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2013-2015 (3 model years).
- Observed bolt-pattern variants: 1 (5x127).
- Observed total offset span across years: 80.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2013 Ram C/V Tradesman, please report it via our About page contact so we can verify and update this record.